Results 1 to 11 of 11
-
3rd June 2008, 11:37 PM #1
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Lost in Space
- Age
- 54
- Posts
- 0
Looking for appreniceship near artarmen sydney
Gidday
)
Will be re locating to sydney in the not too distant future and am looking for a metal fab/ Boilermaker apprenticeship as close to artarmen in sydney as i can get........any help truely appreciated!
Regards LouJust Do The Best You Can With What You HAve At The Time
-
5th June 2008, 08:53 PM #2
SENIOR MEMBER
- Join Date
- May 2006
- Location
- Cowra - Central West NSW
- Posts
- 0
can't think of any one in North Sydney that even makes boils now days... all suits and what not... I feel as though you will be heading west! blacktown for instance...
Good luck.Steven Thomas
-
5th June 2008, 09:25 PM #3
Dissenting opinion
- Join Date
- May 2005
- Location
- Turramurra, NSW
- Posts
- 0
Artarmen is actually Artarmon
I'd say you have Buckleys and none.Bodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
5th June 2008, 09:34 PM #4
SENIOR MEMBER
- Join Date
- May 2006
- Location
- Cowra - Central West NSW
- Posts
- 0
Lou, we have some jobs going...
not in steel though, we are only 45minutes from your new spot.
Your welcome to throw your hat in the ring.Steven Thomas
-
6th June 2008, 10:40 AM #5
Senior Member
- Join Date
- Feb 2008
- Location
- Kingscliff NSW
- Posts
- 12
You could try some of the shipyards around Berrys Bay,Balls Head(Woodleys)they used to use boilermakers quite a lot.Plenty of ship repair joints in and around Sydney who could probaly use your skills.Rozelle area ,Balmain etc
Best of luck looking
Artarmon is mostly Offices and home units (used to live there up to four years ago)but on the Willoughby side away from the units.
-
12th June 2008, 08:58 PM #6
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Lost in Space
- Age
- 54
- Posts
- 0
Thank you :-)
Thx for all the replys
Did a google search n have found a number of fab shops that i'll get in contact with ! Am willing to travel upto an hour if need be initially.........
As always input from forumites appreciated!
Regards Lou
Just Do The Best You Can With What You HAve At The Time
-
13th June 2008, 09:54 PM #7
Tom
- Join Date
- May 2006
- Location
- Sydney
- Age
- 49
- Posts
- 0
Lou if you are in Artarmon it might be worth checking out Weir Warman, as they are in the same suburb. Not sure if they do much in the way of fabrication but they are the largest pump manufacturer in Australia and their factory is fairly large with a foundry on site (well, it was a few years ago last time I was there).
Weir Minerals Australia1 Marden Street, Artarmon, NSW 2064, Australia
+61 2 9934 5100 
+61 2 9934 5201
Good luck,
Tom
-
13th June 2008, 10:23 PM #8
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Lost in Space
- Age
- 54
- Posts
- 0
Thx M8
Your suggestion is muchly appreciated!
Regards Lou
Just Do The Best You Can With What You HAve At The Time
-
24th June 2008, 04:24 PM #9
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Lost in Space
- Age
- 54
- Posts
- 0
Success
Gidday
Just got offered an apprenticeship in Brookvale bout 12.8 km from were im living.......................
For those that gave me a hand n need any welding done feel free to give me a hoy!
Truely appreciated
REgards Lou
Just Do The Best You Can With What You HAve At The Time
-
24th June 2008, 06:43 PM #10
Member
- Join Date
- Feb 2008
- Location
- Brisbane
- Posts
- 1
Congrats Lou - hope it all works out for you
Regards
Rob
-
29th July 2008, 02:45 PM #11
GOLD MEMBER
- Join Date
- Dec 2007
- Location
- Sydney
- Posts
- 99
If you are on this site 'cause your a woodie.Wier Warman minerals are advertising for a pattermaker .Look up seek .com re engineering patternmaker. They are in the old brick pit.
Reply With Quote
Similar Threads
-
Sydney WWW
By oges in forum EVENTSReplies: 2Last Post: 27th June 2001, 05:19 PM
Bookmarks