Results 1 to 5 of 5
  1. #1
    Join Date
    May 2008
    Location
    Melbourne (west)
    Posts
    0

    Default Downlight fire protection

    I am about to install some downlights in this house, replacing normal lights to downlights in master bedroom, hallway & kitchen/dining. Above the ceiling we have a wool insulation which would be fire hazard for downlights, I've been looking around and they're pretty pricey for fire protection and I thought myself that I could either use - Old Nescafe Bend43 coffee tins with holes for ventilation, or does anyone have better ideas? I've also thought about terracotta pots but it might be a bit heavy for the ceiling.

    Cheers
    AP

  2. #2
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    Use compact flourescant downlights and the problem doesn't exist. if you use compact flouros which are the same size you will defintely need to install more of them as the light output is more difuse. There are definte regulations in regards to installing 55 watt halogen downlights and I would reckon that anything covering them would be a no no as the heat build up would be too grear. I have a dozen 55 watt downlights you can have at $5 each including power supplies. We replaced the lights that are on a lot with compact flouro down lights.
    CHRIS

  3. #3
    Join Date
    Oct 2004
    Location
    Glen Forrest, Western Australia
    Age
    63
    Posts
    20

    Default

    Quote Originally Posted by AlpineRaven View Post
    I am about to install some downlights in this house, replacing normal lights to downlights in master bedroom, hallway & kitchen/dining. Above the ceiling we have a wool insulation which would be fire hazard for downlights, I've been looking around and they're pretty pricey for fire protection and I thought myself that I could either use - Old Nescafe Bend43 coffee tins with holes for ventilation, or does anyone have better ideas? I've also thought about terracotta pots but it might be a bit heavy for the ceiling.

    Cheers
    AP
    You can also use flower pots and cut the bottoms out, as long as the insulation is away from the downlights and the heat can escape you should have no problems

    Warrick

  4. #4
    Join Date
    May 2007
    Location
    Blue Mountains
    Posts
    0

    Default

    What Mini said, I'll just add that they are much cheaper to run than halogens as well
    "We must never become callous. When we experience the conflicts ever more deeply we are living in truth. The quiet conscience is an invention of the devil." - Albert Schweizer

    My blog. http://theupanddownblog.blogspot.com

  5. #5
    Join Date
    Feb 2008
    Location
    Brisbane
    Posts
    1

    Default

    Compact Fluros or check out LED downlights - I had a swag installed in an office fitout and they look good, give a soft but powerful light, and draw bugger all power. We had downlights and some floor lights (ie about a foot from the floor - people called them aircraft lights or movie lights when they saw them but gee they were good for being able to see very well when the main floros and downlights were off). The light the LEDs emit is amazing for what they are - I had serious doubts but I'm glad the sparky suggested them. We also had downlights (like you're thinking of) installed in one room as it was set up as a video room for conferences and watch things on tv etc and wanted dimmable lights and the heat these emit is a lot. The LEDs are cool to touch and as I said draw almost no power
    Regards

    Rob

Similar Threads

  1. Choosing downlight transformers
    By Tortise in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 4
    Last Post: 9th February 2008, 10:36 AM
  2. Downlight Clearence
    By freeman in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 6
    Last Post: 21st September 2007, 12:59 PM
  3. Downlight positioning
    By atregent in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 6
    Last Post: 14th August 2007, 11:06 AM
  4. Downlight Guards
    By rod1949 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 7
    Last Post: 4th June 2007, 02:47 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •