Results 1 to 5 of 5

Thread: BBQ plates

  1. #1
    Join Date
    Jan 2003
    Location
    Melbourne, Australia
    Age
    54
    Posts
    243

    Question BBQ plates

    I have cast iron BBQ plates that have been lovingly seasoned, burnt clean after each use and have never seen soap. (I'm strange about my beer glasses too )

    HOWEVER a friend of mine has cast iron plates that are no longer black and wants them returned to their former glory. She asked me as i had resored a pot belly stove to black magnificence, but I suggested high temp engine paint would not be the way to go for BBQ plates.

    So dig deep people and tell me how you restore a cast iron plate that is no longer black. (she didn't tell me what colour it was, but it is not rust :confused: )
    Great minds discuss ideas,
    average minds discuss events,
    small minds discuss people

  2. #2
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    Dave,
    I wouldn't use paint, high temp or otherwise, on any cooking surface, you just don't know what sort of toxins will be released upon heating. What I would do is wire brush if neccesary and then season. To season a iron cooking utensil or plate oil it liberally and then give it a really long slow bake. If it fits in the oven it makes it really easy, otherwise you'll need to put it over a low flame. Repeat as neccesary until your plate/pot/wok has ashiny hard coating on it. I've use this method on all my cast iron skillets, BBQ plate and the wok. The wok, being steel ended up a bit ugly, a sort of brown "varnish" layer over the silvery-grey steel, but all the cast iron stuff is a deep black colour, with the added bonus of being every bit as good, non-stick-wise, as all those fancy teflon type coatings that you can't touch with any metal implements.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  3. #3
    Join Date
    Jan 2003
    Location
    Melbourne, Australia
    Age
    54
    Posts
    243

    Default

    thanks Mick, thats exactly how I deal with my BBQ and wok. I just wasn't sure if the same proceedure would revive it, I'll tell her to give it a go - thanks again
    Great minds discuss ideas,
    average minds discuss events,
    small minds discuss people

  4. #4
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    75
    Posts
    496

    Default

    Go do a big suck-up to your local fish & chip shop find out when they change their oil then throw the cast iron peice in for about 10-15 minutes. It works we did it about 10 years ago and still use the frypan. Tonto

  5. #5
    Join Date
    Jul 2004
    Location
    Adelaide Hills
    Age
    66
    Posts
    0

    Default

    I leave the BBQ plate out overnight after each incineration session and in the morning the thing has a polish on it courtesy of the neighbours springer spaniel.
    Whatever note you blow youre never more than a semitone away from the correct one....(Miles Davis)

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •