![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 9 of 9
Thread: Electric fence
-
12th May 2008, 09:53 PM #1
Electric fence
G'day ppl,
Has anyone hereabouts
built their own ELECTRIC FENCE?
I'm thinking the one with
Car Coil,
Capacitor....................Condensor to some
12Volt DC relay
What else......Indication light?
on the 12V side
Looking for parts used, and HELP!.....
I have been having Cattle coming through the back fence....uninvitedNavvi
-
12th May 2008, 10:15 PM #2
Call the council and have them inpounded.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
12th May 2008, 10:25 PM #3
Ivan, I did something similar about 30 years ago for an interim measure, using an old mower coil and 3 volts to drive it, 12 volts to run the relay and simple control board for the relay. Lasted ten minutes before it burnt out the relay contacts due to overcurrent.
However as an electonic/communication engineer I am very loathe to support the idea now as there are now enforcable standards relating to voltages, currents they can supply, pulse widths, and repitition rates for this type of thing, and use of automotive ignition components is, I recall, a big no no.
There was a design in Silicon Chip magazine 3 to 5 years ago, and kits were available in electronics stores last time I looked for other kits.
This design is a bit complicated but if built by a moderately competent hobbyist should comply with the prevailing standards.
-
12th May 2008, 10:31 PM #4
-
12th May 2008, 10:44 PM #5
I wouldn't.
If you build one and some one gets hurt and what you built does not meet the required standards then you could be on criminal charges.
Safer to buy one then you can always blame the manufacturer.
-
13th May 2008, 10:59 AM #6
Intermediate Member
- Join Date
- Mar 2008
- Location
- Melbourne
- Posts
- 44
Hey Ivan,
DaveG is right. Better to go for a proper unit.
Why not look on ebay for a second hand one. I had a bit of a search and found a few there. Might be the best option.
Dan
-
13th May 2008, 02:54 PM #7
I built a fence energiser based on this design (sorry can't find a direct link to the pdf, but do a search on "Electric Fence Charger and Time Machine.pdf" and you can find a torrent) and had it running for many years. I don't believe it was any more dangerous than any commercial model (I've been zapped by both, many times).
However, having said that, unless you enjoy fiddling with that sort of stuff, it is probably easier (and not too expensive) to buy a second hand commercial model (which is what I am using now).Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
13th May 2008, 07:10 PM #8
Ta Guys.....and any Gals,
Yes!
Thinking I'll go a Cheapie 2nd Hand
Not needing a lot of use out of the one I do get
The Backfence Neighbour has put up 5 x Barber Wire
for me.
The cattle don't like itNavvi
-
13th May 2008, 09:52 PM #9
Similar Threads
-
Electric fence to keep dogs out of garden
By dan76n in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 25Last Post: 30th March 2008, 10:47 AM -
New fence Concreting 2 seperate fence post together
By want2learn in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 2Last Post: 28th March 2008, 09:17 AM -
Electric Fence
By barbz in forum THE GARDEN SHEDReplies: 3Last Post: 10th July 2007, 07:19 PM