Results 1 to 7 of 7
  1. #1
    Join Date
    Feb 2006
    Location
    united pest managers or Australia
    Posts
    121

    Default vertical plaster hanging?

    Is this ok to do?
    I have 3 metre walls and just having alook today, think it would be easlier to hang my new plaster vertically .
    I know it should be hung horizontally but i am after thoughts on the subject

  2. #2
    Join Date
    Jun 2006
    Location
    Barboursville, Virginia USA
    Age
    78
    Posts
    549

    Default

    I have hung it both ways with no dramas. I always judge by the room dimensions and best fit.
    Cheers,

    Bob



  3. #3
    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    675

    Default

    The joins need to be supported by studs if hung vertically. Your studs would need to be spaced exactly 600mm apart evenly across the room so a joins fell on the center of a stud without cutting the sheet. Or you would have to nogg at 600mm centers to support the join. The join must be supported at a minimum of 600mm centers.

    The only time I would hang a sheet vertically is if the wall was no wider than the sheet, therefore no join. or when installing metal stud partitions where the studs can be positioned to fall on a join. In which case the joins are staggered so there is never a join on each side of the stud.

    In New Zealand most plasterboard is hung vertically but the carpenters hang all the plasterboard and set the studs out to accomadated this installation method.

    With a 3m high wall I would start with a 600mm strip on the bottom and a 1200 + 1200 sheets on top. This will put both joins at easy reach without the need for scaffold.

    Honorary Bloke has the dissadvatage in the states that they do not make more than a 3.6m sheet in most places, meaning they have more butt joints, where we can lay a 6m sheet down with no butt joints.

    Cheers Rod
    Great plastering tips at
    www.how2plaster.com

  4. #4
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    In the states they do it that way all the time just make sure your studs line up so you have support at the edges

  5. #5
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    You beat me to it Rod

  6. #6
    Join Date
    Jun 2006
    Location
    Barboursville, Virginia USA
    Age
    78
    Posts
    549

    Default

    Quote Originally Posted by rod@plasterbrok View Post
    Honorary Bloke has the dissadvatage in the states that they do not make more than a 3.6m sheet in most places, meaning they have more butt joints, where we can lay a 6m sheet down with no butt joints.

    Cheers Rod
    6 metres? Do you use a crane?
    Cheers,

    Bob



  7. #7
    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    675

    Default

    No we just get huge shoulders!

    Never take on a plasterer at an arm wrestle LOL
    Great plastering tips at
    www.how2plaster.com

Similar Threads

  1. Vertical blinds
    By MICKYG in forum HINTS & TIPS
    Replies: 3
    Last Post: 29th March 2008, 06:03 AM
  2. Patching Plaster wall over very old plaster
    By aspenglow in forum PLASTERING
    Replies: 4
    Last Post: 23rd February 2008, 07:26 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •