Results 1 to 4 of 4
  1. #1
    Join Date
    May 2008
    Location
    Bunyip
    Posts
    2

    Default Cavity sliding doors

    Hi, all I was wondering if anyone knows much about cavity slding doors? We have a bit of a mouse problem at the minute and have eliminated every posibility we can think of. Is it possible mice could be coming in though the cavity and if so how do I get the door off the track to check?

    any help or advise would be much appreciated

    Regards Davie

  2. #2
    Join Date
    Sep 2007
    Location
    Melbourne
    Posts
    0

    Default Removing your door

    There is a bit of variation in these doors but usually this what you do.

    On one side at the top will be a pelmet board with screws, mine come up through the bottom edge. Unscrew this and take the board out.

    Close the door and up the top you will see the hanging/slidding mechanism... get a couple of spanners and loosen the bolts/nuts that hold your door on and then you should be able to take the door off.

    You should not need to remove the slidding mechanism/track.


    I am not sure this will help you as there is not much you can do to the cavity frame by taking out the door. Can you check that there are no gaps at the bottom of the wall from under the house? What about above in the ceiling. The mice may have built a home or hide in there but I am not convinced that they are entering your house through there.




    Do you want a lone of my cat?????



    Get the little critters

    Chipman

  3. #3
    Join Date
    May 2008
    Location
    Bunyip
    Posts
    2

    Default

    Thanks Chipman,
    I'm sure your advice will help if only to rule out yet another possible entry point. have put Baits in ceiling and under house but the little critters keep appearing.

    Thanks again
    Davie

  4. #4
    Join Date
    Feb 2008
    Location
    Hazelwood North, Victoria
    Posts
    0

    Default

    Hi Dave

    If the cavity door is in an internal wall there is no way a mouse can get in from the top or the side or the bottom.
    The only chance is if it is on an external wall with a cavity like Brick veneer.
    Maybe a mouse hid in there.

    JAMC

Similar Threads

  1. Reconfiguring sliding doors
    By Ronaldo451 in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 4th April 2008, 10:27 AM
  2. Aluminium sliding doors
    By alisonol in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 2
    Last Post: 17th June 2007, 06:45 AM
  3. Aluminium Sliding Doors
    By Dannopower in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 30th April 2007, 09:45 PM
  4. Sliding doors
    By terriqld in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 3
    Last Post: 11th March 2007, 06:26 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •