Results 1 to 5 of 5
  1. #1
    Join Date
    May 2005
    Location
    Melbourne
    Posts
    10

    Default Glass Splashback

    Hey guys,

    I have a glass splashback being installed over an existing brick masonary wall. Now, behind the stove there is an electrical power cable that has been chased in the wall about 7-8mm deep. Should I be worried out the electrical power cable getting hot and brittle over time or should I get some insulation or fc sheeting and liquid nail it to the cable?? What are your thoughts out there???

    Cheers.
    All right chaps... back to work!

  2. #2
    Join Date
    Sep 2006
    Location
    Behind that little door under the thicknesser...
    Posts
    44

    Default

    If it is behind the glass then don't worry about it. Even if it wasn't then your stove should not be pumping out massive amounts of heat outside the body of the stove - if it is then it is inefficient rubbish.

    But if you want to make sure and set your mind at ease then ask your electrcial contractor to fit a length of heat resistant fibreglass tubing over the electrical cable. Or you could rip the back off the stove and stuff any gaping spaces with a glasswool batt........
    Ours is not to reason why.....only to point and giggle.

  3. #3
    Join Date
    Apr 2007
    Location
    Toowoomba
    Posts
    0

    Default

    Depends if you are worried about heat from the cable or heat through the glass, heat from the cable? turn the stove on full and feel the cable, if it gets hot call the electrician cause you have a problem, through the glass? not a problem as glass is a very poor heat conductor, the paint would peel off the back of your splashback before you had a problem with the cable.
    The difference between work and play is having the right tools!

  4. #4
    Join Date
    Jan 2007
    Location
    Adelaide - West
    Age
    43
    Posts
    311

    Default

    You need to make sure that the wall behind the stovetop is fire rated, I would put a sheet of villa board on the wall as an easy solution.
    If you dont play it, it's not an instrument!

  5. #5
    Join Date
    Dec 2007
    Location
    Sydney
    Posts
    1

    Wink Glass Splashback Preparation

    A sheet of villaboard is the best solution if you are needing anymore information visit www.adleiglass.com.au Regards Mel

Similar Threads

  1. Glass in kitchen doors
    By eemgee in forum KITCHENS
    Replies: 5
    Last Post: 4th March 2007, 11:38 AM
  2. cheaper splashback glass?
    By Mybrains in forum KITCHENS
    Replies: 21
    Last Post: 1st November 2004, 11:49 AM
  3. Glass splashback
    By cjr in forum KITCHENS
    Replies: 11
    Last Post: 12th November 2003, 10:40 PM
  4. Glass Splashbacks
    By Jason in forum FINISHING
    Replies: 0
    Last Post: 11th September 2003, 01:11 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •