bifold doors hardware

[EMistral]

Hi guys,

After stripping the paints on 2 bifold doors, I am about to hang them using the existing fittings already attached to the doors.
The fittings consist of top pivots which are a sort of rod fitted with a spring.
But unlike the ones I could see in bunnings, the spring is inside the case.
Then there is the jamb at the bottom supporting the doors.
I used to have all these parts when I took the doors down 2 years ago but it seems that the jambs have disappear as well as one top pivot.
So I need to find those parts.
I went to bunnings and in their doors fittings section, they sell rolltrax products and in the rolltrax catalogue, there is a kit for the parts I need.
However bunnings does not sell it.
I went to 3 bunnings, 2 mitre10 but no success.
Rolltrax does not have a website and even rolltrax does not return any result in google.
I am also having difficulty in finding doors fittings suppliers for bifold doors.
I found plenty for sliding doors, etc...
Could anybody help?
Any contact details for suppliers?
That would be much appreciated.
Without those parts, I can not hang the doors unless I reinstall a brand new and different system but I don't really want to do that because they are quite expensive
I live in Melbourne but ordering only is not a problem.
The rolltrax part kit has the number 2860 if I remember correctly.
But I am just after 2 door jambs/supports and one top pivot.
Thanks a lot.
Eric

[Terrian]

https://www.woodworkforums.com/showthread.php?t=43764
http://www.doorsplus.com.au
www.canterburywindows.com.au

may be of some help.

[TermiMonster]

I went to bunnings and in their doors fittings section, they sell rolltrax products and in the rolltrax catalogue, there is a kit for the parts I need.
However bunnings does not sell it.

Hi Eric,
If Bunnings deal wi the company, ask at the special orders desk. They will be able to get it for you.
Cheers
TM

[DIYChick]

Hi Eric,
Try http://www.hardwarestore.net.au/
http://www.hardwarestore.net.au/Henderson_RMD.html

I dont know much about bifold doors. I recently purchased some sliding doors from these guys and i was very impressed with their knowledge.

DIYChick