![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 21
Thread: New Benchtops
-
31st March 2008, 10:13 PM #1
Novice
- Join Date
- Mar 2008
- Location
- perth
- Posts
- 19
New Benchtops
I am looking at getting replacement bench tops for kitchen and bathroom. I would love to go for a stone (real or fake) finish but am also trying to spend the minimum to achieve a good look. As a compromise I got a quote from Granite Transformations on supplying the bench tops, surfacing and fitting them to open spaces (eg. I have to remove existing tops). They quoted $3000 for kitchen and $750 for bathroom (in any of their standard colours). This sounds expensive for the sizes and when queried on price breakdown the chip board bench tops were only $350, the rest being the labour and surface material.
I have a quote pending from a stone (real and engineered) place but they said to expect an absolute minimum of 5k.
Are Granite Transformations a rip off or would a high quality laminex (such as the square form range) be any cheaper?Last edited by venno; 1st April 2008 at 03:10 PM. Reason: Update plan
-
1st April 2008, 01:20 AM #2
Member
- Join Date
- May 2006
- Location
- Perth
- Posts
- 71
my mate was telling me he could get granite benchtops for about the same price as laminates. but its not italian granite
i will try find out more.
-
1st April 2008, 08:15 AM #3
in a laminate it would cost about $1200 (remember i said about)than you would have to fit them ,this is assuming that you have 33mm thick tops and not the drop front type ,so for that price i would assume that there is more work involved than you are telling us about ,the prices i quote are here in gods backyard
-
1st April 2008, 12:24 PM #4
Novice
- Join Date
- Mar 2008
- Location
- perth
- Posts
- 19
The quote from Granite Transformations includes supply and fitment of 33mm tops wich they will then laminate with the granite sheeting so they end up being a square form edge with pencil round corners and a 40mm thickness.
I would like to get away from my bullnose look and am also changing the size of the bench top by nocking down a raised brick section so I can have a breakfast bar (have to do that myself as well as remove existing bench top as thats not included).
If a square form laminated 40mm top supplied and fitted will be half the cost of the fake granite I will go that route.
cheers
-
1st April 2008, 03:11 PM #5
Novice
- Join Date
- Mar 2008
- Location
- perth
- Posts
- 19
-
1st April 2008, 08:56 PM #6
Cabinetmaker
- Join Date
- Feb 2008
- Location
- Toowoomba
- Age
- 44
- Posts
- 12
-
2nd April 2008, 01:21 AM #7
Novice
- Join Date
- Mar 2008
- Location
- perth
- Posts
- 19
I have had a quote for normal stock standard laminex in bullnosefor $1500 which I must pick up and fit myself.
I had another quote for the laminex squareform 40mm which included installation $2500.
I finally got a quote through for granite (imported from asia), $5300, and I can't have my 200mm overhang for the breakfast bar. My cabinet may also have to be strengthened to support the weight (100kg+). There would also be an additional fee if I opt to have an undersink mount. Refitment of sink, hotplate...etc...is also at my cost. The slab is 20mm thick, to glue on additional end pieces to give a 40mm appearance is also extra.
I went out to G.T. to look at their showroom,the stuff they use is an engineered stone sheeting that is quite thick and heavy. It looks like an engineered stone top because it is, only when you run your fingers down the underside o you realize it isn't complete slab as they don't go all the way in. The feel of the tops are good but they lack that cold sensation you get when touching a large slab of granite. The sample benchtops looked good with a 40mm square edge with pencil round chamfers. The colour range is also quite good. They gave me 6 sample pieces to take home and I intend to test all their claims regarding heat, scratches...etc...
I am now of the opinion that G.T. may not be bad value for money after all, prices have really gone up since I last did a kitchen 10 years ago.
-
2nd April 2008, 11:45 PM #8
Novice
- Join Date
- Mar 2008
- Location
- perth
- Posts
- 19
I called the company who gave me the quote for real granite and asked them why they didn't include an engineered stone option. After revisiting the quote they said they made a mistake and forgot to include gst, so they said to add 10% to all their prices. They then said that all engineered stone and mid to high level granite would be a lot more expensive, and that they had merely given me the cheapest option. Well I responded with no thanks.
I went to laminex today to discuss their squareform tops. After looking at their ones display I was very unimpressed with the feel and finish, didn't even bother pursuing that one further for the 2.5k quote.
Meanwhile on the GT front, the product has lived up to most of their claims. I have dropped a variety of kitchen items on the samples (pass), tried to lightly score the surface with a knife (pass), and placed a hot pot from the burner onto it (fail, but the pot was dam hot). I think the surface would withstand moderate heat but certainly not straight from a full burner pot.
By dropping 3k on the benchtop I am running out of cash for other things like the splashback and getting the doors replaced. I could just go for tiles for a splashback instead of the planned glass (was given a non measured quote of around 800 ballpark). I did want to get 2pac for doors but may have to settle for something cheaper...vinyl maybe...but I see lots of issues reported with it. Ideally I really wanted a nice colonial routed pattern to match in with all my internal doors including the kitchen pantry door.
Any suggestions would be most welcome.
-
3rd April 2008, 08:53 AM #9
my suggestion would be to go back to the start and come up with a realistic budget that includes all your wish items then if you are short in the cash sense wait and save till you have enough to do the job properly rather than going with something you dont want just for the sake of how much money you have now
-
3rd April 2008, 09:49 AM #10
A bit left field, but I have a mate who built formwork on top of his cupboards and then poured a concrete/stone mix to about 40mm into the form work. Once it was dried he polished it himself. It cost him about $50 worth of materials and the cost of tools.
The benchtop looked a million dollars I thought, but he wasn't happy with it and ripped it out and was having a crack at just a laminate top.There was a young boy called Wyatt
Who was awfully quiet
And then one day
He faded away
Because he overused White
Floorsanding in Canberra and Albury.....
-
3rd April 2008, 06:49 PM #11
Novice
- Join Date
- Dec 2007
- Location
- Brisbane
- Posts
- 19
In comparison to a new kitchen,
I just paid 6700 inc gst for a u shape 3.6m across with 3m sides. Alot bigger than yours. This is for supply only it includes.
- Ceasar stone benchtops choice of most colours, could be $600 cheaper if I use the most common white colour
- Blum hinges and runners, soft close on all runners
- Nova handles
- 2 pac finish on all doors and draws choice of any colour, painted locally
- Double pantry and fidge with overheads
- 4 draws at 900 wide
- Over head cabinets all around
- Delivery , cabinets assembled
The cabinets are imported but are good quality.
Just thought I would throw that out there
-
3rd April 2008, 07:19 PM #12
Novice
- Join Date
- Mar 2008
- Location
- perth
- Posts
- 19
-
3rd April 2008, 08:36 PM #13
Just my opinion.....granit trasfomation is the uglyest cwap you could use - besides being way over the top price wise. I
I Love solid granite and I can handle Ceaser Stone etc but reconstituted granite is a horrid joke.
This is a wood work forum ..how about solid wood. I got mine made and delivered 30 % cheaper than laminex. I had to cut, sand, finish and fit though.
Attachment 70524
-
5th April 2008, 10:30 AM #14
Senior Member
- Join Date
- Nov 2005
- Location
- Kilsyth
- Age
- 66
- Posts
- 300
-
5th April 2008, 12:02 PM #15
Member
- Join Date
- Jun 2007
- Location
- Perth, WA
- Posts
- 67
Try here
http://mcmahonauctions.com/
They ofteh have fully assembled kitchens with granite tops around that price
Similar Threads
-
Benchtops - only benchtops
By sCORCH in forum KITCHENSReplies: 3Last Post: 3rd January 2008, 07:04 PM -
Laminated Benchtops
By Larry LP in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 4Last Post: 4th August 2006, 10:25 PM -
Resurfacing benchtops
By therockdoctor in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 2Last Post: 27th March 2006, 09:42 PM -
Benchtops
By ailsa in forum KITCHENSReplies: 17Last Post: 23rd January 2004, 09:47 AM