Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2003
    Location
    Craigie, WA
    Age
    56
    Posts
    6

    Default Painting Aluminium Windows.

    I have just rendered my outside walls and now wondering what to do with the window frames. They are in good nick, but the colour is way out of date.

    I was thinking or removing the glass, giving a light sandbalst with a small home unit, etch prime and repaint in a quick drying 2 pak paint.

    Does any one have thoughts re this or what are the other alternatives.

    I'd appreciate any comments.

    thanks, Lyndsay
    " If the early bird gets the worm....How come the second mouse gets the cheese??? "

  2. #2
    Join Date
    Jan 2004
    Location
    Mackay Qld
    Posts
    11

    Default

    Been there done that!
    The trick is to get the correct etch primer to suit the aluminium otherwise it all falls off later.
    We had to go to the yellow etch primer.Also two types of ali window frame coatings /colourings.Powder coating is the relatively new stuff while the really old ones were anodised as were ours.

    Beware of breathing in the two pack overspray and have a bloody good respirator,otherwise the grandad of all headaches is coming your way.
    Those were our experiences.
    A bloody difficult job with only an average result for a lot of effort.

    Just one man's opinion
    Grahame

  3. #3
    Join Date
    Aug 2006
    Location
    Warrnambool, Vic
    Posts
    49

    Default

    Ive been pondering the same thing, though am very amatuer. Mine are ex-commission home al windows - plain al no paint. would like to give the front ones a tidy up. Would i still need this etch primer bizzo? I dont know paints very well so anything in primary-school-teacher talk would be beautifully appreciated.

  4. #4
    Join Date
    Aug 2005
    Location
    kiama
    Posts
    390

    Default

    You must use an etch primer for aluminium. If the paint already on the windows is powder coat and in good condition you can just sand them back and paint again. If the paint is suspect getting rid of it back to aluminium is best.

    The top primer for aluminium used in the auto trade is an epoxy primer it sticks to everything real well. Etch primers also work but the good ones have had to be fazed out due to pollution requirements and most now are chromate free etches which don't work as well.

    My suggestion is to go to a paint supplier for auto paint, buy an epoxy paint and a two pack auto colour. The most common paint is PPG (old Dulux) ask for DP40 epoxy primer, it comes in 2 packs, You may have to buy a litre of each part its mixed 50/50 but it lasts a few days once mixed but only mix what you think you need for the job you are doing. You can brush it on and there is no need to rub before you colour. It also drys fast after application. You can colour within 30 minutes if you want to, if you spray you can put colour on while its still wet.

    The 2 pack colour can be purchased with a slow hardener and thinner ( its mixed 4-1 -1 , colour, hardener,thinner) if you use slow you can easily brush on the paint and get as good a result as if you used normal house paint. Spraying works better and if you spray use normal hardener/thinner but you will need to do a heap of masking as the paint sticks to anything real well. As mentioned get a good mask and don't do it unless you have good ventilation. Preferably a breeze blowing.

    As brushing uses very little material if you can't buy small quantities go see a smash repairer armed with some good air tight containers he will probably charge you a bit more but you won't have lots of waste paint left over. ( the colours especially only have a shelf life of a couple of years at most ) and as the paint will last 10 plus years on the windows it will have well and truely gone off before you need to repaint.

    If you want to speed up the drying time (if spraying) you can use a fast hardener or better still an accellerator to dry it in about 15-20 minutes

  5. #5
    Join Date
    Aug 2006
    Location
    Warrnambool, Vic
    Posts
    49

    Default

    yeah digging up an oldie here but didn't want to be one of those people who ask, get answers then nick off and never come back. though i have been back i thought id dig this up and say the windows went really well. a coat of etch primer then the colour of choice they look like new. Don't quite work like new but looks are good enough for now!

Similar Threads

  1. Painting Colonial windows
    By csp in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 14
    Last Post: 22nd October 2005, 05:23 PM
  2. aluminium windows
    By rackrussel in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 2
    Last Post: 21st September 2005, 10:15 AM
  3. Aluminium sliding windows
    By FrankS in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 2
    Last Post: 4th May 2005, 07:36 AM
  4. Painting Sash Windows
    By FrankS in forum PAINTING
    Replies: 5
    Last Post: 27th January 2005, 12:10 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •