Results 1 to 5 of 5

Thread: Floor boards

  1. #1
    Join Date
    Jul 2005
    Location
    Ipswich QLD
    Age
    55
    Posts
    177

    Default Floor boards

    We pulled up the carpet here at home over the easter weekend to discover that some of our floors had been polished and some had not. No big deal really but what was intersting that each room has a hole or two drilled into the floor through to the outside. It turns out after asking around that the holes were more than likely drilled during the 1974 floods to help the water to at least drain from the house after the water had subsided We had found the tidal mark when renovating our sons room, It was about 300mm from the roof so the old place got a bit wet during the flood. Each room has one or two holes which I will have to plug up before we get our floors done.
    Dave,
    hug the tree before you start the chainsaw.

  2. #2
    Join Date
    Jan 2007
    Location
    Grange, Brisbane
    Age
    53
    Posts
    44

    Default

    My first thought was that they were radiator pipe holes... until I remembered this is Queensland, and not the chilly uk!
    Cheers, Richard

    "... work to a standard rather than a deadline ..." Ticky, forum member.

  3. #3
    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    52

    Default

    Once saw the same in a house I was sanding in. It turns out the house was being used as a hydroponic dope farm and the water pipes were run under the house and up into the rooms through these holes!!!
    http://floorsander.blogspot.com/

    extracare(at)optusnet(dot)com(dot)au

  4. #4
    Join Date
    Jul 2005
    Location
    Ipswich QLD
    Age
    55
    Posts
    177

    Default

    I'm definately not growing dope, the houses on either side are the same as ours. Holes drilled through the floors to allow the drainage after the big wet. Now to find some dowels about the same calibre to plug them up.
    Dave,
    hug the tree before you start the chainsaw.

  5. #5
    Join Date
    Jun 2007
    Location
    Victoria
    Posts
    32

    Default

    You should be able to find the same boards at a local demo yard. Just cut out the holed boards and replace them

    Cheers
    Craig

    Quality Isn't Expensive, It's Priceless:

    http://www.connollys.com.au

Similar Threads

  1. Floor Boards
    By PAJ in forum FLOORING
    Replies: 6
    Last Post: 13th April 2008, 08:21 PM
  2. Old Floor Boards
    By PAJ in forum FLOORING
    Replies: 2
    Last Post: 17th December 2006, 05:53 AM
  3. Floor boards
    By Fat al in forum FLOORING
    Replies: 4
    Last Post: 16th September 2006, 06:08 PM
  4. floor tiles on wood floor boards
    By stevenroyals in forum TILING
    Replies: 5
    Last Post: 30th May 2006, 06:05 PM
  5. replacing floor boards
    By George in forum FLOORING
    Replies: 5
    Last Post: 25th October 2002, 09:58 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •