Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2008
    Location
    Melbourne
    Posts
    2

    Default Vertical Nail Lamination

    I am planning to build a workshop under my house (It's elevated at the front, virtually double storey with nothing but open space underneath, I don't know why the original builder didn't make use of this space but they didn't so I will - probably cost restraints during the 1950's I guess)
    The plan will of course require removal of existing stumps and replacement or additions to the existing bearers, to cut a long story short I have consulted the Vic Timber Framing Manual which suggests that for the required span what is needed is two 190 X 45mm F17 seasoned hardwood members vertical nail laminated.
    My question is - Can I leave the existing bearer (circa 1950's, was originally F7 unseasoned I guess but by now is probably F3000 because I can't drive a nail into it without pre drilling!) and nail laminate one F17 either side of this existing bearer and maintain the same structural integrity as two F17's laminated directly to each other?

    I know this is a sort of long winded question but this is my first forum venture
    Thanks

  2. #2
    Join Date
    Sep 2004
    Location
    Strzelecki Ranges Victoria
    Posts
    395

    Default

    Yes, as long as the new 'bearers' have the required end support.
    Peter Clarkson

    www.ausdesign.com.au

    This information is intended to provide general information only.
    It does not purport to be a comprehensive advice.

  3. #3
    Join Date
    Oct 2007
    Location
    Seven Hills, NSW
    Posts
    159

    Default

    You are too helpful Ausdesign. Keep answering the questions before I can. What he said.

Similar Threads

  1. De-lamination
    By sjevan in forum FINISHING
    Replies: 3
    Last Post: 18th December 2006, 08:12 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •