Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2008
    Location
    Sydney
    Posts
    2

    Default Varnishing a parquetry floor

    We have parquetry floors laid in our apartment. The vanish has worn off where we once had an office chair with the computers.

    To re vanish this area, could we just said back the spot and vanish or would we have to do to whole loungeroom?

  2. #2
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Theoretically you should do the whole floor.

    But I'd try wiping a bit of polyurethane on with a nice soft cotton rag, say 2 or 3 coats and see what it comes up like. It might be good enough to forget doing the whole lot
    Regards, Bob Thomas

    www.wombatsawmill.com

  3. #3
    Join Date
    Feb 2008
    Location
    Sydney
    Posts
    2

    Default

    Thanks, will give that a go.

Similar Threads

  1. Resurfacing a parquetry floor
    By Groggy in forum FLOORING
    Replies: 4
    Last Post: 16th September 2006, 06:28 PM
  2. varnishing jarrah floor boards
    By Beaton in forum FLOORING
    Replies: 3
    Last Post: 9th September 2005, 12:58 PM
  3. Best Brushes for Varnishing
    By PenRex in forum FINISHING
    Replies: 4
    Last Post: 14th April 2000, 03:23 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •