![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: All-in-one tap
-
12th February 2008, 11:03 PM #1
Hack
- Join Date
- Aug 2006
- Location
- Perth, WA
- Posts
- 38
All-in-one tap
Ive got a tap in my bathroom that is from the 80's or so and has developed a leak. Normally I'd just change the washer but after taking the tap top off (flippin hard job as it was) and the whole tap is in one piece.
I forgot to take a photo to show you what I mean but I figured any plumbers would know the sort of thing Im talking about.
Onto my question, I need to replace it but the taps are fugly too, is it easy enough to get replacements for the whole set?
Let me know if you want a photo to see what I mean.
Cheers!
-
13th February 2008, 05:32 AM #2
Senior Member
- Join Date
- Jul 2007
- Location
- Sydney-south
- Posts
- 333
You can get replacements for anything, if its a basin its ususlly a pain in the neck to change them.
Probably the thing i hate doing the most, basin sets and rusty old pillar cocks........Plumbers were around long before Jesus was a carpenter
-
13th February 2008, 10:38 AM #3
you may be able to just change the tap mechanisn without changing the body of the tap.
-
17th February 2008, 04:02 PM #4
New Member
- Join Date
- Feb 2008
- Location
- Australia
- Posts
- 1
I would replace the tap ware with a good australian brand. How every don't get your self into to much trouble call one of the plumbing firms.
Last edited by jow104; 17th February 2008 at 06:44 PM. Reason: advert