![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 9 of 9
-
30th January 2008, 10:38 PM #1
New Member
- Join Date
- Jan 2008
- Location
- Sydney
- Posts
- 1
Can a gravity fed hot water system be emptied out?
I paid a plumber today to drain my gravity fed hot water system. He said that he couldn't empty it out because it would be dangerous to empty it out, so he drained it into half and let it dry by itself. It is a 315L bottle and it is installed in the roof cavity, so I wonder if it would ever dry out by itself. Was the plumber fooling me?
-
30th January 2008, 10:43 PM #2
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
I certainly can't think of any reason not ot drain it completely and in fact have done so 3 weeks ago, when I replaced it with a continuous unit. it does not seem to have created any problem
-
30th January 2008, 11:47 PM #3
Just wondering why you wanted to empty it out?
Doing so shouldn't be a problem, provided the heating element is turned off as it will overheat and melt down within a minute or less if run dry.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
31st January 2008, 12:09 AM #4
Was it getting near beer o'clock???
I too can't see any reason why it can't be fully emptied out. Did he give a reason why it would be so dangerous to empty it out? I would be phoning him and asking why if he didn't explain himself.
-
31st January 2008, 07:23 AM #5
maybe the power was still connected to it, lol
-
3rd February 2008, 05:05 PM #6
Member
- Join Date
- Feb 2008
- Location
- Sydney
- Posts
- 66
unless the tray was rusted out, but why would he drain half then. Sticking a hose out the old tray drain and connecting to the plug works well, with less mess.
-
4th February 2008, 10:36 AM #7
I'd say the power is still connected to it, and that he has left it half full so that the unit doesn't burn your house down.
The problem is the eventually -in about 1-3 years it will eventually run out of water through evaporation. This will mean that the element will be heating up and will not turn off because the water ( which isn't there) wont heat up.
One of two things will happen
- the element will burn itself out, and the unit will stop working, the fail safe switch will trip and it will be ok. Until someone turns the switch back on at the power board - this is quite likely- for instance when a sparky is working on your house.
- The element will heat up and stay hot till something in your house catches fire- in which case you won't really be to worried about the old hot water service in your roof. I'd ask the plumber if the old unit has had the power disconnected- get him to write it out on paper, tell him it's for your insurance assesment for the new year.
If you dont play it, it's not an instrument!
-
4th February 2008, 10:53 AM #8
As Make it Work says ring him up and ask him - simple.
-
4th February 2008, 04:41 PM #9
Senior Member
- Join Date
- Jul 2007
- Location
- Sydney-south
- Posts
- 333
If the power was still connected why not isolate it at the fuse box?? I really cant think of why he could only half drain it. Even if the safe tray was rusted you only have to turn on the lowest HW tap to drain it, or any or all HW taps for that matter. Strange.
Or maybe he needs to come back with a pair of snips to skin it and tax the copper tank!?Plumbers were around long before Jesus was a carpenter
Similar Threads
-
Hot Water System
By gregt in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 2Last Post: 16th March 2007, 07:27 AM -
Electric hot water system making cold water
By Nolesy in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 7Last Post: 14th December 2006, 08:36 PM -
Hot water system troubleshooting (bosch water wizard 780)
By weezlebub in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 5Last Post: 5th July 2006, 07:41 PM -
hot water system
By Gaynor in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 19Last Post: 1st August 2004, 06:47 PM