Results 16 to 29 of 29
-
28th January 2008, 10:49 AM #16Intermediate Member
- Join Date
- Sep 2006
- Location
- Brisbane
- Posts
- 29
Thanks everyone for your responses
Food for thought...
Just to explain - we have a young family, and also I as a uni student was breathing large and eye irritating amounts of formaldehyde for several hours almost daily for two years, so I have had a large exposure. Just trying to reduce my/our overall total exposure to a carcinogen....
LeonieB
-
28th January 2008, 11:24 AM #17
Hi leonie - I would have thought Universities would have been right up there on the dangers of inhaled Formaldehyde - have you suffered any long term effects? Inhaled formaldyhe is pretty yukky stuff.
Neil (ubeaut) does make a good point about the substances in recycled timber though.
I wouldnt be at all surprised if DDT, chlordane, deildrine, coal tar and napthene soluble resins turned up in old wood - particularly pine type timbers. I've had a most unpleasant experience with Old Growth hoop pine in the past.
-
28th January 2008, 11:24 AM #18Senior Member
- Join Date
- Feb 2006
- Location
- USA
- Posts
- 399
Conversion Varnish
Conversion Varnish, which is one of the most popular coating being used today in both the large and small finishing shops that want a coating that is very hard, durable, and chemical resistant, it contains low formaldhyde that is within the goverments limits.
-
28th January 2008, 12:22 PM #19Happy Feet
- Join Date
- Sep 2007
- Location
- Armadale
- Posts
- 887
I have sometimes noticed a distinct lack of subtlety and tact on this forum.
Now your trying to scare Leonie silly.
The woman has gone to great lengths and trouble to make her environment as safe as possible.For as she has pointed out, very good reasons.
I am sure she realises the obvious, that you cant entirely avoid hazardous material but to try to reduce exposure as much as possible makes sense.
To now tell her that the effort shes made is a waste of time, is unkind and patronising.
And, yes I know this reply is very unsubtle.
Astrid
-
28th January 2008, 01:59 PM #20
sometimes it is far better to be blunt rather than subtle.
-
28th January 2008, 04:15 PM #21
Here you go - more household formaldehyde sources to worry about...
"Quaternium-15 is a preservative found in many cosmetics and industrial substances that acts as a formaldehyde releaser. It can be found in numerous sources, including but not limited to: mascara, eyeliner, moisturizer, lotion, shampoo, conditioner, nail polish, personal lubricants, soaps, body wash, baby lotion or shampoo, facial cleanser, tanning oil, self-tanning cream, sunscreen, powder, shaving products, ointments, personal wipes or cleansers, wipes, paper, inks, paints, polishes, waxes and industrial lubricants. It can cause contact dermatitis, a symptom of an allergic reaction, especially in those with sensitive skin, on an infant's skin, or on sensitive areas such as the genitals.
Imidazolidinyl urea is an antimicrobial preservative used in cosmetics. It is chemically related to diazolidinyl urea which is used in the same way. Imidazolidinyl urea acts as a formaldehyde releaser.
Diazolidinyl urea is an antimicrobial preservative used in cosmetics. It is chemically related to imidazolidinyl urea which is used in the same way. Diazolidinyl urea acts as a formaldehyde releaser.
Melamine resin or melamine formaldehyde is a hard, thermosetting plastic material made from melamine and formaldehyde by polymerization. This plastic is often used in kitchen utensils or plates and is the main constituent in high pressure laminates such as Formica and Laminex. Melamine resin is often used to saturate decorative papers which are directly laminated onto particle board; the resultant panel is often referred to just as "melamine" and is frequently used in ready-to-assemble furniture and inexpensive kitchen cabinets.
Note that studies indicate that health risks from formaldehyde relate to peak and average levels of exposure, not cumulative exposure: http://www.cancer.gov/cancertopics/f...k/formaldehyde
-
28th January 2008, 11:34 PM #22
-
29th January 2008, 12:10 AM #23Intermediate Member
- Join Date
- Sep 2006
- Location
- Brisbane
- Posts
- 29
Hi MacS
I googled conversoin varnish but did not find anything...who makes it and is this the brand name?
Thanks for everyone's input.
LeonieB
-
29th January 2008, 01:12 AM #24
Leonie - Think you'll find that the within govt limits means it's most likely much higher than the Mirotone one you asked about originally.
Cheers - Neil
And, yes I know this reply is very unsubtleKEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Report icon at the bottom of all Posts, PM's and Blog entries.
-
29th January 2008, 01:25 AM #25Intermediate Member
- Join Date
- Sep 2006
- Location
- Brisbane
- Posts
- 29
HI all
I just did some research and found that 0.2% or higher of formaldehyde content is banned overseas.
Still looking for more ideas on other brands of formaldehyde-free lacquers (satin finish), which seem to be more available overseas than here.
Thank you
LeonieB
-
29th January 2008, 01:38 AM #26Senior Member
- Join Date
- Feb 2006
- Location
- USA
- Posts
- 399
Here, is another coating you might use.....
Leonie,
Try "goggling" this one, "Precatalyzed Lacquer" or precat lacquer.
Precats, are better coatings then Nitrocellulose Lacquer" but not as good as Conversion Varnish.
Conversion Varnish, is the name of the coating, not the company name.
Question:
Is it common to find suppliers that sell nitrocellulose, precat lacquers, and conversion varnishes.
-
29th January 2008, 07:22 AM #27
Mac, our paint industry is very different to yours... your environmental standards are higher than ours(I think?).
Things like water finishes are just starting to take a hold here, most of our coatings are still petrochemical solvent based.
Conversion varnish here is pretty well unheard of term and products like turbine guns are non-exsistant in the domestic market, here at a hardware shops all you will find are mostly polyU's and a few oil finishes we do not have the diversity of domestic products like the USA.....................................................................
-
29th January 2008, 08:30 AM #28Senior Member
- Join Date
- Feb 2006
- Location
- USA
- Posts
- 399
That's good info....
Harry,
Thank you, that's important information for a finishing writer.
MacS
-
29th January 2008, 12:23 PM #29
Similar Threads
-
Spray Finish
By sprog1 in forum FINISHINGReplies: 11Last Post: 7th July 2006, 07:31 PM -
Spray finish
By river rat in forum FINISHINGReplies: 2Last Post: 27th March 2006, 05:44 AM -
Spray finish...so many things to consider!
By buzsaw in forum FINISHINGReplies: 22Last Post: 13th December 2005, 11:19 PM -
Spray Finish for Pine Entertainment Unit
By Gazza in forum FINISHINGReplies: 19Last Post: 8th February 2005, 12:16 PM
Bookmarks