Results 1 to 8 of 8
  1. #1
    Join Date
    Dec 2007
    Location
    Croydon VIC
    Posts
    9

    Default Power point loc in kitchen

    Hi all. I'm planing a reno on my kitchen. Probably a flat pack to reduce costs. My question is, to maximise the small amount of bench space avail, I propose to put the microwave under the drain side (in part) of the sink but I'm not sure if I can do this because of the power point for the microwave. In the attached photo, you can see the locaion of the sink and where I propose to put the microwave and power point. Under the microwave I plan to have a drawer. I guess it won't matter if the drawer is above the microwave rather than the microwave above the drawer. Sparkies, do you see this as complying with the Regs?

  2. #2
    Join Date
    Dec 2007
    Location
    central queensland
    Age
    47
    Posts
    48

    Default

    best bet would be to have the outlet in the cupboard next to the microwave, so you can turn it off without pulling it out of the shelf first.

  3. #3
    Join Date
    Jan 2006
    Location
    Melbourne
    Posts
    722

    Default

    Is your concern that the GPO is to be under the sink? They put them down there for dishwashers, so it should be possible I would have thought?

  4. #4
    Join Date
    Dec 2007
    Location
    Croydon VIC
    Posts
    9

    Default

    Quote Originally Posted by OBBob View Post
    Is your concern that the GPO is to be under the sink? They put them down there for dishwashers, so it should be possible I would have thought?
    OBBob, please excuse my ignorance but what does GPO mean? Yea I wasn't sure if putting a power point on the right hand side wall under the sink drainer would be feasible. Basically I don't want to decide on the cabinets and appliance location only to find out later that I's not safe (legal) to put a power point there.

  5. #5
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    3,542

    Default

    GPO=powerpoint
    Cheers

    DJ


    ADMIN

  6. #6
    Join Date
    Jan 2006
    Location
    Melbourne
    Posts
    722

    Default

    Sorry ... yep Genral Purpose Outlet ... power point.

    You should check with an electrician but one may answer here? I'm not an electrician it was just my logic.

  7. #7
    Join Date
    Dec 2007
    Location
    Croydon VIC
    Posts
    9

    Default

    Thank you

  8. #8
    Join Date
    Dec 2007
    Location
    central queensland
    Age
    47
    Posts
    48

    Default

    have put many an outlet under the sink, no worries there but plumbers aways seem to have the dishwasher tap pointing at the gpo ,lol, got into trouble a few times for overtightening the taps when i turn them the other way

Similar Threads

  1. Installing power point in render
    By Graha in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 7
    Last Post: 14th August 2007, 10:47 PM
  2. Standard charge for additional power point
    By ArianAgain in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 7
    Last Post: 21st May 2007, 12:20 AM
  3. Use of power point ok?
    By Manda in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 12
    Last Post: 5th September 2006, 04:52 PM
  4. Small Flash from my power point
    By Jason Steele in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 21
    Last Post: 2nd July 2006, 01:10 PM
  5. power point wiring
    By ariel in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 44
    Last Post: 27th May 2006, 09:12 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •