Results 1 to 8 of 8
Thread: Power point loc in kitchen
-
11th January 2008, 03:59 AM #1New Member
- Join Date
- Dec 2007
- Location
- Croydon VIC
- Posts
- 9
Power point loc in kitchen
Hi all. I'm planing a reno on my kitchen. Probably a flat pack to reduce costs. My question is, to maximise the small amount of bench space avail, I propose to put the microwave under the drain side (in part) of the sink but I'm not sure if I can do this because of the power point for the microwave. In the attached photo, you can see the locaion of the sink and where I propose to put the microwave and power point. Under the microwave I plan to have a drawer. I guess it won't matter if the drawer is above the microwave rather than the microwave above the drawer. Sparkies, do you see this as complying with the Regs?
-
11th January 2008, 07:21 AM #2
best bet would be to have the outlet in the cupboard next to the microwave, so you can turn it off without pulling it out of the shelf first.
-
11th January 2008, 07:43 AM #3
Is your concern that the GPO is to be under the sink? They put them down there for dishwashers, so it should be possible I would have thought?
-
11th January 2008, 01:36 PM #4New Member
- Join Date
- Dec 2007
- Location
- Croydon VIC
- Posts
- 9
OBBob, please excuse my ignorance but what does GPO mean? Yea I wasn't sure if putting a power point on the right hand side wall under the sink drainer would be feasible. Basically I don't want to decide on the cabinets and appliance location only to find out later that I's not safe (legal) to put a power point there.
-
11th January 2008, 01:40 PM #5
GPO=powerpoint
Cheers
DJ
ADMIN
-
11th January 2008, 01:41 PM #6
Sorry ... yep Genral Purpose Outlet ... power point.
You should check with an electrician but one may answer here? I'm not an electrician it was just my logic.
-
11th January 2008, 01:51 PM #7New Member
- Join Date
- Dec 2007
- Location
- Croydon VIC
- Posts
- 9
Thank you
-
14th January 2008, 07:46 PM #8
have put many an outlet under the sink, no worries there but plumbers aways seem to have the dishwasher tap pointing at the gpo ,lol, got into trouble a few times for overtightening the taps when i turn them the other way
Similar Threads
-
Installing power point in render
By Graha in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 7Last Post: 14th August 2007, 10:47 PM -
Standard charge for additional power point
By ArianAgain in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 7Last Post: 21st May 2007, 12:20 AM -
Use of power point ok?
By Manda in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 12Last Post: 5th September 2006, 04:52 PM -
Small Flash from my power point
By Jason Steele in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 21Last Post: 2nd July 2006, 01:10 PM -
power point wiring
By ariel in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 44Last Post: 27th May 2006, 09:12 AM
Bookmarks