Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2008
    Location
    Sydney
    Posts
    7

    Default Driveway Retaining wall to brick or block?

    Hello All,

    I am building a 12m long retaining wall to level out a slope so a car can be parked on it.

    The max hight of the wall will be 400mm to 100mm

    It is also on a slight hill.

    Am looking at putting cowra pebels as a surface.

    I was originally looking at boral pyrmont blocks but than found the tasman system which are more than half the price so im leaning towards the tasmans which work in much the same way as the pyrmont except they have lips instead of interconnecting pins.

    I was also thinking about putting allot of bricks i have spare to use.

    If i was to use the bricks should i put in a agie drain the same way as i would for the tasman blocks.

    What footing would i need to put down?
    Can i get away without using reo?

    The bricks i have are sold bricks which are about 30 years old

    Links for the tasman system
    http://www.ibs.com.au/tasman-more-information.html
    http://www.islandblock-paving.com.au...in_tasman.html

    The cost of the tasman blocks would be about $534 + gravel

    Any ideas or help would be much appreciated

    Happy New year guys.

    When life deals you lemons, dont complain just get on with it and make lemonade.

  2. #2
    Join Date
    Dec 2007
    Location
    Templestowe
    Posts
    5

    Default

    Big Rick,

    Car parked above or below the wall?
    Pebble surface is not structural so it is up to your wife's approval.

    I've done some nice stuff with Boral's 'Heathstone' Standard blocks and 'Ravenastone' Rockface caps.

    These manufacturers have done all the engineering calculations for you so if you follow their instructions exactly it will work. Their web site looks pretty good. However if you do it yourself with bricks & mortar then you must engineer it yourself. Proper drainage would be essential as would be good footings for any wall. The block walls are flexible but a brick & mortar wall is not so will crack.

    Nice new year project for you.

  3. #3
    Join Date
    Jan 2008
    Location
    Sydney
    Posts
    7

    Default

    Thanks Cavemanvic,

    Car above the wall.

    Yeah i was thinking that the blocks would be a bit better, Is there any real difference between the boral interlocking pins and the tasmans tongue and groove set up?

    When life deals you lemons, dont complain just get on with it and make lemonade.

  4. #4
    Join Date
    Dec 2007
    Location
    Templestowe
    Posts
    5

    Default

    The car above the wall will tend to load the blocks so they push away from the car. Make sure your usual parking position is at least a metre away from it.

    They both look almost identical. Your price is so good go for the Tasmans. It'll look great!

Similar Threads

  1. Brick retaining wall
    By LeoAU in forum LANDSCAPING, GARDENING, OUTDOORS
    Replies: 20
    Last Post: 20th November 2006, 11:31 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •