Results 1 to 15 of 16
Thread: WOODWORKING QUIZ for 22 June 04
-
22nd June 2004, 09:56 PM #1
WOODWORKING QUIZ for 22 June 04
Good Evening Friends,
Since I am posting these quizzes in the evening where you fellows are and forget about the time difference and the fact that you fellows like to get a good night of sleep and fail to have the time or interest in them because I am using American terms. As per my answer to the previous post and my request for someone to help me learn your terms and uses, that I might make the quizzes more interesting. Any and all help would be appreciated. I will extend the answer time by one day my time, since you are some 14 hours ahead of me.
Todays quiz should be one that effects everyone no matter where you are.
What is a ground fault interrupter and why is it used?
Respectfully,Ralph Jones Woodworking
London, Ohio
-
22nd June 2004, 10:11 PM #2
Ralph,
I'm guessing you are referring to an Earth Leakage Breaker/ Earth Leakage Current Detector?
Over to one of the electrical boffins for an explanation!!
P
-
22nd June 2004, 10:15 PM #3
I didn't have a clue so I looked it up. Electricity is all Dutch to me.
Ground fault interrupters are designed to protect from electrical shock by interrupting a household circuit when there is a difference in the currents in the "hot" and neutral wires. Such a difference indicates that an abnormal diversion of current from the "hot" wire is occuring. Such a current might be flowing in the ground wire, such as a leakage current from a motor or from capacitors. More importantly, that current diversion may be occuring because a person has come into contact with the "hot" wire and is being shocked. When a circuit is functioning normally, all the return current from an appliance flows through the neutral wire, so the presence of a difference between "hot" and neutral currents represents a malfunction which in some circumstances could produce a dangerous or even lethal shock hazard.
It only takes one drink to get me loaded. Trouble is, I can't remember if it's the thirteenth or fourteenth.
-
22nd June 2004, 10:21 PM #4
"When a circuit is functioning normally, all the return current from an appliance flows through the neutral wire"
Hang on, hang on!!!!
If all the current that goes in comes out again, why are we paying for it. Someone call the cops. The electricity people are ripping us off.
It only takes one drink to get me loaded. Trouble is, I can't remember if it's the thirteenth or fourteenth.
-
22nd June 2004, 10:45 PM #5Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 1,460
Originally Posted by Ralph Jones
Peter.
-
23rd June 2004, 07:01 AM #6
RCD = Residual current device
AS/NZS 3000 Clause 2.5.3.3, "Other Electrical Installations", requires RCD protection on socket outlets not exceeding 20 A where there is an increased risk of electric shock.
dont forget if you dont earth it you can still get a zap :eek:
cheers IanSome People are like slinky's,
They serve no purpose at all,
but they put a smile on your face when you throw them down the stairs.
-
23rd June 2004, 09:42 AM #7If all the current that goes in comes out again, why are we paying for it. Someone call the cops. The electricity people are ripping us off."I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
23rd June 2004, 09:52 AM #8
Using that theory, someone buying fine woodwork could argue that the cost of the finished article should be less than the timber purchased to make the article
Unfortunately we are charged (no pun intended) for the energy and not the electrons.
- Wood Borer
-
23rd June 2004, 10:14 AM #9
You fellows have no idea how much you are teaching me in your terms as compared to ours, and when I answer the quiz tomorrow morning my time, you will see how they parallel.
Thank you for my education.
Respectfully,Ralph Jones Woodworking
London, Ohio
-
23rd June 2004, 04:25 PM #10Originally Posted by silentC
I feel I should be defending myself here, but can not be bothered, keep sending me that money.. I have an expensive habit to support..
BTW I work here : http//www.loyyangpower.com.au
KevI try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
Kev
-
23rd June 2004, 04:58 PM #11
My Uncle was at Hazelwood, that's not too far from you if I recall correctly. I'm a Mirboo North boy from way back.
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
23rd June 2004, 07:30 PM #12
I know the suburn of WAY BACK in Mirboo North, I can hear the BANJO's playing even now........
I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
Kev
-
23rd June 2004, 08:29 PM #13
The acronym for it is ELCB which is Earth Leakage Circuit Breaker of which you can have one installed on the Main Switch Board or there are portable ones that you can plug into a power outlet and then plug your power tools into.
I think you would find that they are compulsory on building sites in NSW.
-
23rd June 2004, 09:50 PM #14
Good Evening Friends,
Your EICB Earth Leakage Circuit Breaker is exactly the same thing as our GFCI Ground Fault Circuit Breaker as they both do the same job and intercept a possible short in a wire , tool or line and will automatically trip the circuit breaker.
As several of you have already stated that they should be or are mandatory on all construction jobs and also we too have the ones that you can carry in you pocket to check the extension cords for reverse polarity, which is just as dangerous as a short.
Thank you for your support.
Respectfully,Ralph Jones Woodworking
London, Ohio
-
24th June 2004, 10:20 AM #15Originally Posted by Brudda"I don't practice what I preach because I'm not the kind of person I'm preaching to."
Bookmarks