Results 1 to 12 of 12
  1. #1
    Join Date
    Mar 2004
    Location
    Sydney
    Age
    72
    Posts
    35

    Smile Photos of our new kitchen

    Here they are, as promised. Took 6 months and many $$$$ but worth the effort and cost. Dealt with a great kitchen company but sub-contracted the rest. Husband did all the finishing work by himself.

  2. #2
    Join Date
    Sep 2003
    Location
    Kyabram
    Age
    45
    Posts
    171

    Default

    That looks pretty good, Cassandra.

    A Veritas twin screw vice would go really nice on the end of the island.

    Ben

  3. #3
    Join Date
    Jul 2003
    Location
    rural qld
    Age
    68
    Posts
    139

    Default

    im jealous my kitchen is still sitting in the middle of the lounge rm in pieces
    david

  4. #4
    Join Date
    Apr 2004
    Location
    eastern suburbs, melbourne
    Posts
    486

    Default

    and i'm jealous that you can manage the "Homes and Gardens" style uncluttered worktops ( translate .... benches? ) ... or was that just for the photos
    no-one said on their death bed I wish I spent more time in the office!

  5. #5
    Join Date
    Aug 2003
    Location
    Narrabri, NSW
    Posts
    0

    Default

    Hi Cassandra,
    I really like your kitchen layout, you have managed a large amount into a relatively small area. Looks great!

    Just a question or two about the lighting. Are you using the down lights for your only light source? Are they enough? How do you go under the cupboards for light and shadows? We are about to run a stack of new wire into the roof and I was thinking of putting in down lights while I was there for the kitchen.

    Any advice or thoughts from your experience?
    Cheers
    Anthony

  6. #6
    Join Date
    Mar 2004
    Location
    Sydney
    Age
    72
    Posts
    35

    Default

    To answer your questions/comments:
    Yes the clean, uncluttered look was for the photo. I try but never seem to be able to maintain that look for longer than an hour or so.

    Lighting...........had lots of varying advice from this forum. Decided on low voltage down lights because of look mainly. We have 14 in ceiling and 6 in glass fronted cupboards. They are great in both brightness and coverage. They run on 5 different circuits and rarely need to be all on at the same time. The light in the Qasair range hood (wonderful, by the way) provides extra just where it is needed.

    Advice:
    Do your measuring up of exactly where you want your downlights before the wiring is put in. Figure out the circuits then too. When the ceiling is in and the benchtops are on, do the measuring again to be sure. Mark the exact placement of the holes. Make sure they are in line precisely from all directions (North to South, East to West). If one is out of line it is so noticeable and could bug you over time.

    Cass

  7. #7
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Im sorry but that broom didnt hide the bit with no skirt.


    Al

  8. #8
    Join Date
    Jun 2000
    Location
    Western Australia
    Age
    78
    Posts
    122

    Default

    Cassandra,Great job well done go to the top of the class but on the way there you can come start on my place.

    Cheers
    Johnno

    Everyone has a photographic memory, some just don't have film.

  9. #9
    Join Date
    May 2003
    Location
    Canberra
    Age
    64
    Posts
    0

    Default Low Voltage Downlights

    Antman
    I have 5 low voltage downlights in my kitchen and no other lights. 3 over one bench and 2 over another which runs at an angle of about 60 degrees to the first.

    I see the main advantage as having the light coming straight down on the benches and when you stand in front of a bench no shadow is created by you blocking light coming from behind.

    Note that there are different globes that project light over different angles
    ie narrow angle, wide angle

    Spacing of lights is far more critical than standard globe fittings.

    I have bright light over the benches and dull light in the centre of the floor where it is not really needed.

  10. #10
    Join Date
    Jun 2003
    Location
    Western Sydney
    Posts
    149

    Default

    Cassendra,

    Great kitchen. Is it supply & install or supply only. Don't mind knowing the company name.

    Regards,

    Theva

  11. #11
    Join Date
    Mar 2004
    Location
    Sydney
    Age
    72
    Posts
    35

    Default

    supply and install. Company was BRINDABELLA, out near you. Great company to work with and very honourable.
    Cass

  12. #12
    Join Date
    Jun 2003
    Location
    Western Sydney
    Posts
    149

    Default

    Thanks Cassandra.

    Regards,

    Theva

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •