![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Revarnishing cabinets & doors
-
26th November 2007, 06:34 PM #1
Member
- Join Date
- Nov 2007
- Location
- Perth
- Posts
- 0
Revarnishing cabinets & doors
I'm doing up a unit and the kitchen cabinets and a screen to hide the fridge are varnished Jarrah veneer on particle board.
I have washed all veneer surfaces with sugar soap to remove any grease and given a light sanding with steel wool.
Now I need a bit of advice about applying a clear satin coat.
1. Do I need any further preparation?
2. I would prefer to apply with a cloth to get a furniture look finish.
Any advice appreciated.
Similar Threads
-
Rebated doors & replacing levers with knobs
By TomH in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 1Last Post: 13th November 2007, 11:23 PM -
bi-fold doors
By pawnhead in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 32Last Post: 13th November 2007, 11:15 PM -
Spraying cabinets, doors and trim
By JontyG in forum PAINTINGReplies: 6Last Post: 5th November 2007, 02:07 PM -
re-juvinating hand carved doors
By Tricky Dicky in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 1Last Post: 11th March 2007, 01:24 AM -
Restoring Carved doors
By Tricky Dicky in forum FINISHINGReplies: 0Last Post: 2nd February 2007, 03:09 PM