Results 31 to 34 of 34
-
16th November 2007, 01:46 PM #31
thanks guys, finaly hired one from Rite Way Hire, Coburg, its for $66 weekend rate. plus a wheelbarrow for $10 for whole weekend.
According to Riteway they will give me jackhammer which can break concrete upto 150mm without reo (without any issue).
will post pic at the end of sunday. gonna work on front garden and lawn on this weekend too, and have to lay tourqey 14mm stones on whole side of house.
so i hope it weather would be on my side
-
19th November 2007, 03:05 PM #32
finaly able to got rid of this concrete yesterday, and it now resting in local tip
there was reo in it, and bloody slab apperntly looking seperate were indeed joined by reo, which was making it too difficlut to shake them with crowbar.
but at the end job was done with Makita Jackhammer, spend about 4 hours to learn and break whole concrete.
so whenever using a jackhammer, be carefull, dont drill too down, always make cracks on side not in middle (from my experience now , LOL)
two times, managed to stuck bit in concrete, and that was not fun at all to take bit out of concrete.
her are some pics:
-
19th November 2007, 03:21 PM #33
here is another pic
-
26th November 2007, 04:37 PM #34
I started reading this thread 'cause I have some concrete to break before I do a decking job. I got more than I bargained for. I got all the information I needed plus some great laughs.
Thanks to everyone, bloody fanatstic!!!
Cheers,
Dr - 307.All decks should be stained....black white black white black white.......after all it would match anything!
All roofs should be covered or tiled.....black colorbond, silver mist, black colorbond, silver mist, black colorbond.........after all, we wouldn't want a mismatch!
Bookmarks