Hi all,
after some advice on plumbing a newly delivered 10000 litre tank. I've done a bit of research & it seems that as far as "bits" are concerned, one Ozzie company seems to have the tank scene sorted it terms of rain heads, first flush diverters etc. I've seen a system of rigging up your tank overflow so that it helps reducing the sludge on the tank bottom - see this
http://www.rainharvesting.com.au/aut...m_system_1.asp
My question is - how do you hook this up inside the tank if the inlet is on the opposite side of the overflow? Do I have to get inside the tank? If so, how do I get out???
Thanks for your time

Border Boy