Results 1 to 6 of 6
Thread: Sliding lockable door
-
20th November 2007, 04:04 PM #1Senior Member
- Join Date
- Sep 2007
- Location
- Melbourne, Australia
- Posts
- 202
Sliding lockable door
Hey guys
We are wanting to install a sliding lockable door in our laundry so we can have the dryer on and open the door. Also want one where our new deck is. I have foudn them to be quite expensive from most of the retailers.
Can anyone reccomend a place where I can get them, I could isntall it myself or if you just know of a place I'd love to just get it.
Cheers
-
20th November 2007, 04:49 PM #2SENIOR MEMBER
- Join Date
- Sep 2007
- Location
- Nicholls ACT
- Posts
- 0
I think you can buy a bolt mechanism which attaches to the back of the door and engages in a hole drilled in the runner. Or you could just drop a rod of the appropriate length in the runner.
There is this style
http://www.acehardwareoutlet.com/(n1...Source=froogle
There is also this sort
http://www.instawares.com/sliding-gl...4-1067.0.7.htm
-
20th November 2007, 04:55 PM #3Senior Member
- Join Date
- Sep 2007
- Location
- Melbourne, Australia
- Posts
- 202
Sorry I dont think I was clear. I want a flyscreen security door...Not just a solid sliding door.
-
21st November 2007, 03:47 PM #4
Good sliding security doors aren't cheap, but I guess then you only get what you pay for.
Why not flue your drier into the roof space or through the roof? That might solve part of your problem.Jack
-
21st November 2007, 04:07 PM #5
Oohsam
As Jacksin says good sliding security doors aren't cheap but if you go ahead and you want to fit it yourself my advise would be to get a security door company to come and measure it and supply the door and all the components that go with it.
I used to measure and sell security doors and the measurements are critical and complicated on a sliding door if you don't know what you are doing.
-
21st November 2007, 04:31 PM #6
Or through the wall.
Peter Clarkson
www.ausdesign.com.au
This information is intended to provide general information only.
It does not purport to be a comprehensive advice.
Similar Threads
-
Sliding door coming off - what to do?
By mirz in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 12Last Post: 27th December 2007, 06:50 PM -
Guide for sliding door
By ramonski72 in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 6Last Post: 8th August 2007, 11:47 AM -
Inserting patio (sliding or hinged) door into brick veneer house
By GordonM in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 2Last Post: 19th June 2007, 04:12 PM -
"Hollow" wall for sliding door
By JB in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 6Last Post: 29th August 2006, 11:07 PM -
Latching a sliding door
By mic-d in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 12Last Post: 2nd March 2005, 07:54 PM
Bookmarks