Finishing a Jarrah Burl Table Top

[dogowar]

Hi, Hope someone can guide me here. I am making a jarrah burl coffee table. Was looking to use the envirotex glass finish for the top only. I have used a solvent finish to ensure there will be minimal bubbles coming up and the clear finish it has left on the sides of the burl are fantastic. Can i apply the envirotex to the top only, or would it be advisable to have it down the sides as well? Or what can I use to stop the envirotex from dribbling down the side and leave a nice smooth even finish at the edge (eg will blue tac work?)?

Thanks in advance

[artme]

Welcome to the madhouse Doggy!
Can"t give advice on Enviro but the Bluetac idea might work. Try it on scrap first. If that fails you could try masking tape. Again try on a scrap first.
Good Luck!!
Make sure we get pics of finished article.