Results 1 to 6 of 6
  1. #1
    Join Date
    Oct 2006
    Location
    australia
    Posts
    0

    Thumbs up Brick re-pointing

    Hi
    i am new to this forum,i want to know if any one used SVENIC pointing and grouting gun tool . it is like a manual chaulking gun, It is stated as specialist tool for applying pointing
    mortars.I bought a special WESTOX quickpoint lime and cement based mortars not able to work nothing come out of nozzle at all
    1) should i use plasticizers? if so where can i buy it?
    2) is there special mortars for Svenic manual gun
    Any info regading this is appreciated
    Red

  2. #2
    Join Date
    Nov 2007
    Location
    Orstralia
    Posts
    256

    Default

    I think you have wasted your money, I have seen vids of these "machines" and all they do is bog up the joint, they dont point by a long shot, the pointing comes after you have bogged up the joint, if you can scrape the excess bog out of the joint that is.

    Some tips on pointing..

  3. #3
    Join Date
    Oct 2006
    Location
    australia
    Posts
    0

    Default thank you

    Hi bricke
    That is true i waste my money, time and material by using svenic chaulking gun where it is hard to work with, you got a good web page
    thanks for the info , i appreciate it
    bye
    red

  4. #4
    Join Date
    Oct 2007
    Location
    Sydney, Australia
    Posts
    65

    Default

    I took this picture at a client's house. The repointing was being done by Dwyer's using a caulking gun type setup, and struck with a small tool and pointing trowel. From memory, actual cement powder content was pretty minimal. While the application method seems a little surprising, it also worked well and is thoroughly cured and stuck!

    Regards, Adam.

  5. #5
    Join Date
    Nov 2007
    Location
    Orstralia
    Posts
    256

    Default

    Quote Originally Posted by addo View Post
    I took this picture at a client's house. The repointing was being done by Dwyer's using a caulking gun type setup, and struck with a small tool and pointing trowel. From memory, actual cement powder content was pretty minimal. While the application method seems a little surprising, it also worked well and is thoroughly cured and stuck!

    Regards, Adam.
    Surprising results indeed, as it looks like it was done by someone who was trained in pointing, and not an amateur.

  6. #6
    Join Date
    Oct 2006
    Location
    australia
    Posts
    0

    Default thanks adam

    Thank you Adam for the photo ,it is good work i appreciate for the reply Thanks
    red

Similar Threads

  1. Replies: 8
    Last Post: 11th March 2008, 03:38 PM
  2. brick fireplace
    By Quinny in forum BRICKWORK
    Replies: 11
    Last Post: 29th February 2008, 07:51 PM
  3. Stone edging over a brick border?
    By petar in forum LANDSCAPING, GARDENING, OUTDOORS
    Replies: 3
    Last Post: 11th November 2007, 08:11 PM
  4. using existing brick wall as brick veneer
    By HaydnG in forum BRICKWORK
    Replies: 3
    Last Post: 28th August 2007, 11:59 AM
  5. brick pointing advice needed.
    By Donno in forum BRICKWORK
    Replies: 9
    Last Post: 8th September 2006, 08:41 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •