![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 10 of 10
-
9th October 2007, 02:27 PM #1
New Member
- Join Date
- Oct 2007
- Location
- Melbourne
- Posts
- 2
Where to buy Recycled Tasmanian Oak Floorboards in Melbourne
Hi All
Wondering if anyone knows of a good place to buy some recycled boards in Melbourne?
I need to replace about 8sqm of floorboards as the previous owners used chipboard when they extended... The original boards are 133mm Tasmanian Oak and have quite a lot of colour shift/variation. I found one batch that looked quite pale and even in colour but I'm sure its quite hard to tell how it will look when polished???
Thanks for your help
Hugo
-
9th October 2007, 04:14 PM #2
Classic re-cycled floors
97608808 or 0419506855
Skye demolition
97890888
-
9th October 2007, 05:11 PM #3
Member
- Join Date
- May 2007
- Location
- Williamstown, Victoria
- Posts
- 65
There is a place that specialised in Australian Hardwood (and reclaimed timber I think) on Kororiot Creek Rd in Altona. Forget the name sorry.
-
9th October 2007, 06:18 PM #4
Why is it that you want recycled? it may be easier to just use new Tasmanian Oak flooring, 133 for a Tasmanian timber is standard, try calling Gunns timber in your state? you may have to go through there website,
Good luck!
P.S if there is a fair bit of variation, order a bit more so you can pick and choose accordinglyRegards,
Marques Flooring
Your One Stop Shop For All Your Flooring Needs..
www.marquesflooring.com.au
-
9th October 2007, 06:45 PM #5
GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 85
- Posts
- 632
The place in Kororoit Creek Rd is Shiver-me-Timbers.
Tom
"It's good enough" is low aim
-
10th October 2007, 12:08 AM #6
New Member
- Join Date
- Oct 2007
- Location
- Melbourne
- Posts
- 2
Hi All
Thanks very much for such quick and helpful replies.
As far as I can gather I'm better off with recycled as it will be an easier match with the old boards (which make up about 75% of the floor), in regards to ageing/drying process and size/water content. Hope I'm on the right track?
Will definately get some extra boards and there is stock at some of the above places.
Thanks again
Hugo
-
10th October 2007, 08:18 AM #7
Generally if you are to re-sand the existing floor back to raw when coating the new flooring you should get a pretty close match that way, Tasmanian Oak, from what i have seen has not changed to much over the years so it should not be to hard to get a close match.
Regards,
Marques Flooring
Your One Stop Shop For All Your Flooring Needs..
www.marquesflooring.com.au
-
10th October 2007, 07:09 PM #8
Personally, I strongly recommend getting the secondhand material to do any sort of repair work.
Here is a job I sanded & finished recently, where I advised the owner and builder to go with secondhand boards for the small extension. The owner was keen to go with my suggestions, the builder on the other hand, thought it would of been easier to use new material. He was right, the new stuff was easier to work with, but the end result was no where near as good as it could of been if recycled boards were used.
-
14th October 2007, 11:11 AM #9
Intermediate Member
- Join Date
- Jun 2007
- Location
- Melbourne
- Posts
- 33
The guys at Delta in Plummer St, Port Melbourne have got it all, at reasonable prices and I've found they're top blokes to deal with.
Not so happy with a pricey bloke in Spotswood.
-
9th November 2007, 08:23 AM #10
New Member
- Join Date
- Nov 2007
- Location
- Colombia
- Posts
- 1
hugopeterson
Have you reviewed the oak flooring in this website:
http://www.gatewoodfloors.com/index....how/catid/5059
?