Need some bricks to match

[DJ’s Timber]

When I had the power upgraded to wire my sheds up, I had to put in a new meter box as it did not meet the regulations.

So my new meterbox is 2 brick courses shorter in height then the original one, so that means I need to pick up some bricks to fill in the hole

Does anyone have some the some or know where I can get some?

[brickman]

See if there are any below ground or under a deck etc. that u can remove and replace with commons as every batch of bricks varies in shades and textures . Recycling not seen bricks would probably be the best option , cheers

[DJ’s Timber]

See if there are any below ground or under a deck etc. that u can remove and replace with commons

Already tried that, only got 1 brick. Main prob here is only the end walls of the house are brick whilst the rest is weather board.

[brickman]

Any extra bricks above eaves or in gable ends ( if any )? . Othe option is to infill above meter box with matching flashing , just trying to help . Cheers

[Brickie]

Do you have a better pic DJ, I am on a job at the moment that has very similar looking bricks.

[DJ’s Timber]

Do you have a better pic DJ, I am on a job at the moment that has very similar looking bricks.

[Brickie]

Close but no cigar, mind you if you smear mud on the new brick, they will blend in a treat..

I try to get a pic tomorrow.

[DJ’s Timber]

Cheers, so are you offering to blend them in as well

[Brickie]

Cheers, so are you offering to blend them in as well

Of course, no problem, you know where I live, just swing by one day with the house..

[DJ’s Timber]

Of course, no problem, you know where I live, just swing by one day with the house..

[Skew ChiDAMN!!]

Render unto DJ...

[Brickie]

Render unto DJ...

The brickwork looks part way rendered as it is..

[Brickie]

This is what I laying at the moment, like I said close, but no cigar.

Let me know and Ill get you a dozen or so..

[DJ’s Timber]

Thanks Brickie, might keep looking. If I can't get a closer match, I think I might make up a trim to go around it.