Results 1 to 3 of 3
Thread: Levelling a bathroom
-
7th November 2007, 11:59 AM #1
Truth seeker
- Join Date
- Nov 2004
- Location
- Eastern Suburbs Melbourne
- Posts
- 0
Levelling a bathroom
Started on my sister's bathroom yesterday. There are floorboards which were cupped slightly, but I did my best to flatten them with belt sander and plane. One corner though is a little low as a result of restumping. I would say about 4 to 7 mm. How does one level (or go close to level) the bathroom without taking off all the floor boards and starting over again. Would you worry about the height that it's out or use more adhesive (in the low corner to raise the height) as she will be putting tiles over the fibre cement when I put it down?
-
7th November 2007, 03:17 PM #2
Sawdust abuser
- Join Date
- Sep 2006
- Location
- Behind that little door under the thicknesser...
- Posts
- 44
put the tile underlay down, then water proof then use leveling mud (or is it the other way around?) then glue down the tiles....
Ours is not to reason why.....only to point and giggle.
-
7th November 2007, 05:54 PM #3
PLU.MBR.BL.DR.
- Join Date
- Jan 2007
- Location
- Adelaide - West
- Age
- 43
- Posts
- 311
Pretty much what he said.
If you dont play it, it's not an instrument!
Reply With Quote
Similar Threads
-
Bathroom Renovation Project
By juan in forum BATHROOM & TOILETReplies: 152Last Post: 3rd May 2008, 04:58 PM -
Small bathroom renovation almost complete
By sco in forum BATHROOM & TOILETReplies: 5Last Post: 7th April 2007, 10:18 PM -
Complete Bathroom in a Day
By batcat in forum BATHROOM & TOILETReplies: 3Last Post: 31st January 2007, 12:41 PM
Bookmarks