Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: Weep Holes??

  1. #1
    Join Date
    Oct 2007
    Location
    Cecil Hills
    Posts
    23

    Default Weep Holes??

    Hi all!!! I'm just new to the forum and I was after some advice.
    I just bought a house that is rendered, however, the previous owner has rendered over the weep holes. Can i create weep holes with a chisel and hammer or a cement drill or should i get a professional to create weep holes?
    Thanks in advance.

  2. #2
    Join Date
    Aug 2006
    Location
    Sydney
    Age
    65
    Posts
    1,248

    Default

    I guess the best course of action is to employ a professional weep hole installer if you want a top job..however if you don't mind it looking a bit rough you could probably knock a few hole in yourself with the cement drill.

    Good luck.

  3. #3
    Join Date
    Feb 2006
    Location
    united pest managers or Australia
    Posts
    121

    Default

    is there such a thing as a professional weephole installer?
    Or are you talking about a brickie ?

    just get a concrete drill the size of a pencil and drill through the mortar

    easy done

  4. #4
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    Quote Originally Posted by PhoenixP View Post
    Hi all!!! I'm just new to the forum and I was after some advice.
    I just bought a house that is rendered, however, the previous owner has rendered over the weep holes. Can i create weep holes with a chisel and hammer or a cement drill or should i get a professional to create weep holes?
    Thanks in advance.
    On the other hand, have you ever seen a weep hole weep?

  5. #5
    Join Date
    Oct 2007
    Location
    Cecil Hills
    Posts
    23

    Default

    Thanks for all the input.
    I just went to inspect the house again and you can visibly see where they covered up the weep holes.
    I'll take to it with a cement drill. Are there any tips for drilling as I've never drilled cement before.
    Thanks for all the advice.

  6. #6
    Join Date
    Jan 2007
    Location
    Grange, Brisbane
    Age
    53
    Posts
    44

    Default

    Are weep holes for when houses get sad? What's a weep hole?
    Cheers, Richard

    "... work to a standard rather than a deadline ..." Ticky, forum member.

  7. #7
    Join Date
    Apr 2006
    Location
    near Mackay
    Age
    60
    Posts
    0

    Default

    I thought I read in an old thread once, that weep holes could be rendered over, as they wern't really necessary.

    Somebody who knows about these things, please correct me if I am wrong.

  8. #8
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    Quote Originally Posted by Ironwood View Post
    I thought I read in an old thread once, that weep holes could be rendered over, as they wern't really necessary.

    Somebody who knows about these things, please correct me if I am wrong.
    That is my impression as well, in fact on our previous house we had them rendered over, plasterer said the same thing.

    However, try and get your CoA on a house without them and see how you go, at least here in Vic.

    So, on this place we had them put in, got our CoA, then closed them in with expanding foam to keep the vermin out. They make great spider traps, and believe it or not mice can easily get through them SWMBO wasn't happy about that idea!

  9. #9
    Join Date
    Oct 2007
    Location
    Cecil Hills
    Posts
    23

    Default

    The building & pest inspection report said the weeps holes were a must have.

    Apparently have the weep holes covered creates moisture which also creates a nice environment for possible termite infestation.

    I'd rather be on the safe side and just re-open the weep holes.

  10. #10
    Join Date
    Jun 2007
    Location
    In a House
    Posts
    256

    Default

    Phoenix P the Pest control guy is spot on about the weep holes in the brick work and the possiblity of creating a nice environment for termites the weep holes provide ventilation for the subfloor section have you thought about cutting out holes with a masony blade in a grinder and installing the vents? I installed some old terracotta type units they are about 1 bick wide and two bricks high at my place which was rendered I glued them into place and painted them the same colour as the render and they look like they were always there!

  11. #11
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    Quote Originally Posted by patty View Post
    Phoenix P the Pest control guy is spot on about the weep holes in the brick work and the possiblity of creating a nice environment for termites the weep holes provide ventilation for the subfloor section have you thought about cutting out holes with a masony blade in a grinder and installing the vents? I installed some old terracotta type units they are about 1 bick wide and two bricks high at my place which was rendered I glued them into place and painted them the same colour as the render and they look like they were always there!
    Patty, what you are describing there aren't weep holes as I understand them. Weep holes are a gap between two bricks without mortar, IMHO.

    What you are describing are vents and are certainly necessary for houses with sub-floor space, however they are not used in houses with concrete slabs, as ours is.

  12. #12
    Join Date
    Jun 2007
    Location
    In a House
    Posts
    256

    Default

    Apologies Big Shed you are correct I thought Phoenix P was referring to the weep holes as vents it was just the way i have interpreted the question!

  13. #13
    Join Date
    Feb 2006
    Location
    vic
    Posts
    174

    Default

    If the render has three coats of paint then the weep holes are not required, the building inspector should have pointed this out.

  14. #14
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    4,565

    Default

    Quote Originally Posted by thebuildingsurv View Post
    If the render has three coats of paint then the weep holes are not required, the building inspector should have pointed this out.
    I am intrigued, what is the rationale behind that? Very interesting!

  15. #15
    Join Date
    Feb 2006
    Location
    vic
    Posts
    174

    Default

    Weep holes are there to allow the moisture to escape that gets into the cavity through porous brickwork. The moisture runs down the cavity hits the flashing and goes out the weephole. If the brickwork is waterproof then there is no moisture thus no weepholes. Building Code allows this.

Similar Threads

  1. Filling floor joist nail holes
    By Programmer in forum FLOORING
    Replies: 4
    Last Post: 13th May 2005, 09:23 AM
  2. What bit for drilling water holes in bottom of Glazed PotPlant Pots
    By barrysumpter in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etc
    Replies: 2
    Last Post: 30th November 2003, 07:56 PM
  3. Filling big holes to make smaller holes
    By Sir Stinkalot in forum GENERAL ODDS N SODS
    Replies: 9
    Last Post: 4th October 2003, 01:51 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •