Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2007
    Location
    Brisbane
    Posts
    4

    Default Walk in pantry shelves

    Hi,<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    Have built a "Walk In" pantry in the newly renovated kitchen, and was after some advice on building the shelving. <o:p></o:p>
    I was wondering if anyone could advise me on the best distances between the shelves would be? The floor to ceiling height is 2.4m<o:p></o:p>
    <o:p></o:p>
    Secondly as it’s a corner walk in, the shelves will be an "L' shape, what’s the best way to install them so as they don’t tend to sag in the middle? <o:p></o:p>
    And lastly is getting a cabinet maker to cut the shelves out of melamine to size? <o:p></o:p>
    Thanks for your help in advance!<o:p></o:p>
    Lindsey<o:p></o:p>
    <O:p</O:p

  2. #2
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    781

    Default

    hi and welcome to the forum!

    If you have a plan of the pantry, please post it - when I designed our WIP I thought about what we would store in it and decided to make shelving that in parts was very narrow, to cater only for tins (two deep) and at one end was around 40CMs deep for cereal boxes etc. There is a range of ways to cater for sagging, but it is hard to know without dimension drawings...... a rule of thumb would be "the more bracing, the better" At least with melamine you can cut it with rounded corners etc, which can be a little more pleasing to the eye.
    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

  3. #3
    Join Date
    Jun 2003
    Location
    ...
    Posts
    1,460

    Default

    The optimum height of the shelves is dependant on what you want to store in the pantry, as it depends on the type and size of canisters and bottles and cans you want to store.


    The best idea is to let your wife decide on the canister storage system that she would like, then let her buy all of them that she needs , and more for later on , and then you can design the system.


    That's what we did, we settled on the clickclack system of canisters. Bought the lot and then I built the shelving specifically for them. I also incorporated pull out wire baskets and the 2 freezers into the pantry.


    But let your wife do the designing and then, even if it doesn't work out, you cannot be wrong.


    Peter.

  4. #4
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    781

    Default

    .......which has no bearing on whether it will end up "your fault" or not

    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

Similar Threads

  1. 12' MDF shelves with Kwila Trim
    By barrysumpter in forum FINISHING
    Replies: 3
    Last Post: 30th May 2000, 02:10 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •