Page 2 of 2 FirstFirst 12
Results 16 to 29 of 29
  1. #16
    Join Date
    Aug 2007
    Location
    Yanderra nsw
    Posts
    28

    Default

    [quote=Ausyuppy;611200]Rrich,

    Appliances are usually wired;
    brown = active
    blue = neutral
    Green/yellow = earth.

    This is the colour code for flexiable cables not for appliances. If they are wired in building wire (TPS) then the red black and green/yellow applies

  2. #17
    Join Date
    May 2004
    Location
    Tasmania
    Age
    48
    Posts
    118

    Default

    Quote Originally Posted by another termite View Post
    This is the colour code for flexiable cables not for appliances. If they are wired in building wire (TPS) then the red black and green/yellow applies
    What sort of appliance is wired with TPS

    Ausyuppy is spot on for the current rules.

    Cheers, Jack
    "There is no dark side of the moon really. Matter of fact it's all dark."

  3. #18
    Join Date
    Sep 2007
    Location
    Latrobe Valley Victoria
    Posts
    196

    Default Call A Sparkie

    IMO This thread Shouldn't exist Its a job for an electrician

    Only today I go a call from a lady who told me when she touched her dishwasher and sink at the same time she got a shock

    When I got there i measures the voltage between the two and guess what she wasn't imagining it it was 116.5v

    Guess why???

    Someone has wired a Power point wrong??

    Not quite
    The earth wire was not connected

    I could tell by the way the it installed it wasn't done by a sparkie
    Electricity:
    One Flash and you're ASH

  4. #19
    Join Date
    Sep 2007
    Location
    Thailand
    Age
    63
    Posts
    90

    Default

    Oz wiring colours according to the "standard".
    “I do not think there is any thrill that can go through the human heart like that felt by the inventor as he sees some creation of the brain unfolding to success... Such emotions make a man forget food, sleep, friends, love, everything.” - Nikola Tesla.

  5. #20
    Join Date
    Aug 2007
    Location
    Yanderra nsw
    Posts
    28

    Default

    Quote Originally Posted by Jack E View Post
    What sort of appliance is wired with TPS
    Some ovens and cooktops are wired direct to TPS

  6. #21
    Join Date
    Feb 2005
    Location
    37 Deg, 52. 697' South 145 deg, 15.627' East. Elevation 78M
    Age
    72
    Posts
    62

    Default

    Quote Originally Posted by scubabob View Post
    a "friend of mine" has changed a couple of power points in his house to newer, prettier ones and one of them had different coloured wires and he's not sure if he has put them in correctly.

    there is a red wire, presumably active, a green/yellow wire and a bare wire. he has assumed that the bare wire is earth and connected it up to that, the red one to live and the green/yellow to neutral. He hasn't used it yet and isnt game to. is there a way to test if its done properly?
    Green and yellow are the standard for the EARTH, Think he should get a sparky to look at his wiring. Or he could plug something in and let the smoke come out.

    Seriously if you don't know GET SOME ONE WHO DOES KNOW.
    Two things are infinite: the universe and human stupidity; and I´m not so sure about the universe.


  7. #22
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    126

    Default

    Many contributors to this thread have correctly identified the colour codings and suggested that the offending power-point be checked by a licensed sparky.

    However, this may not be the only dodgy bit of wiring. There may be other very amateur wiring elsewhere. I think your friend should get the sparky to test all wiring and give a written report that it is safe and complies with standards.

    There are very real safety and liability issues here. What if someone gets electrocuted or there is a fire? Will the insurer deny the claim because of illegal wiring? And you know there is at least one instance of illegal wiring!

    I think your friend could be in a potentially serious situation.


    Graeme

  8. #23
    rrich Guest

    Default

    It is nice to see that your tail wiring is as inconsistent as ours.

    My Unisaw is connected to a 240 V power point. The power point has three wires, red, black and green, the is black phase A, the red is phase B and green is earth. Well the factory supplied tail wouldn't reach the power point so I went looking for a longer tail. I went up in size but was irritated that I couldn't find a power cable with black, red and green wires. A neighbor who is a sparky told me that it is acceptable to use the white for one of the phases. (Per our NEC, I marked the white wire to indicate that the wire was hot although the NEC doesn't really apply to the tail of an appliance.)

    I installed the plug and finally I'm taking apart the electrics of saw to add the new power tail. Much to my surprise I found that the UL approved, manufacturer supplied power tail used black for phase A, white for phase B and green for earth. That really went against the grain!

  9. #24
    Join Date
    Oct 2007
    Location
    Sydney
    Posts
    0

    Default

    Rrich, you're probably aware that the 240v system used in Australia is not a balanced system as used in North America. I once had to point that out to a manufacturer of line filters who was making some rather dubious and somewhat absurd claims. Their reply was, err "we'll look into that". Look into it all you like, it ain't balanced

  10. #25
    Join Date
    Sep 2007
    Location
    Thailand
    Age
    63
    Posts
    90

    Default

    Quote Originally Posted by rrich View Post
    It is nice to see that your tail wiring is as inconsistent as ours.

    My Unisaw is connected to a 240 V power point. The power point has three wires, red, black and green, the is black phase A, the red is phase B and green is earth. Well the factory supplied tail wouldn't reach the power point so I went looking for a longer tail. I went up in size but was irritated that I couldn't find a power cable with black, red and green wires. A neighbor who is a sparky told me that it is acceptable to use the white for one of the phases. (Per our NEC, I marked the white wire to indicate that the wire was hot although the NEC doesn't really apply to the tail of an appliance.)

    I installed the plug and finally I'm taking apart the electrics of saw to add the new power tail. Much to my surprise I found that the UL approved, manufacturer supplied power tail used black for phase A, white for phase B and green for earth. That really went against the grain!
    Rrich, you are obviously from & living in the USA.
    Luckily for you, the new NEC code (2008) will be updated to include such "new" terms as "earthing" as opposed to grounding (2 different things) & I do believe that a wiring colour code of sorts will be implemented. The new colour code will follow IEC requirements, as does the rest of the world currently follows.

    Quote Originally Posted by Pete F View Post
    Rrich, you're probably aware that the 240v system used in Australia is not a balanced system as used in North America. I once had to point that out to a manufacturer of line filters who was making some rather dubious and somewhat absurd claims. Their reply was, err "we'll look into that". Look into it all you like, it ain't balanced
    Sorry Pete but the US may have a different system to that of Australia but the word "balanced" still means the same thing in both countries.
    A "multiphase system" is said to be "balanced" when the line currents have the same magnitude & Power Factor. Therefore, neither system is "balanced" for general consumer load. The only loads that are considered balanced are 3 phase motors & the like.

    Australia, on the whole, uses the TT system. The USA uses some variations to different systems, given the state. This greatly complicates the US system. US sparkies have a horrible job discerning between state rules etc.

    Australia, on the other hand, is quite simple (excluding SWER supplies);

    1] The main supply is 3 phase (120 degrees apart).
    2] From a "consumer" supply point of view, each phase is 240 volts with respect to neutral/earth (MEN system).
    3] From a "consumer" point of view, phase to phase voltage is 415 volts.
    4] Each "consumer" distribution transformer is Delta (primary) & Star (secondary).

    The USA primarilary uses 2 phases (240 volts at 180 degrees) to supply high current equipment. 3 phases are also used (120 degrees). "Earthed leg Delta" transformers are common in the US & non-existant in Australia.
    “I do not think there is any thrill that can go through the human heart like that felt by the inventor as he sees some creation of the brain unfolding to success... Such emotions make a man forget food, sleep, friends, love, everything.” - Nikola Tesla.

  11. #26
    Join Date
    Oct 2007
    Location
    Sydney
    Posts
    0

    Default

    I think we're talking slightly different jargon. Same word, different meaning. The US system is most certainly a "balanced" system where the 2 "phases" (I have subsequently learnt that I am using the term incorrectly) are 180 degrees apart and the centre (or should that be center ) tapped to provide neutral. Whether the LOAD is balanced or not is a whole different animal. Oh here we go, just found a link that explains it a whole lot better than my crappy attempt http://en.wikipedia.org/wiki/Split_phase That transformer shown is wired in a balanced configuration (earth is on centre tap). Ironically the same link goes on to discuss load balancing. Ah, here's a better link that covers balanced power as I meant it. http://www.epanorama.net/documents/g...ced_power.html

    My background was not in domestic electrical, so sorry about the confusion.

    One problem that comes up with this however is that there is a HUGE difference between the North American 230V system and, say, the Oz 230V single ended system. In Oz we have one live 230V conductor, in North America they have TWO live conductors which between then provide 230V.

    Anyway, all a bit technical really

  12. #27
    Join Date
    May 2004
    Location
    Tasmania
    Age
    48
    Posts
    118

    Default

    Quote Originally Posted by another termite View Post
    Some ovens and cooktops are wired direct to TPS
    If ovens and cooktops are wired using TPS then they are "hard wired" and are not an "appliance"

    This is why non sparkies should not do their own wiring

    Cheers, Jack
    "There is no dark side of the moon really. Matter of fact it's all dark."

  13. #28
    Join Date
    Aug 2007
    Location
    Yanderra nsw
    Posts
    28

    Default

    Quote Originally Posted by Jack E View Post
    If ovens and cooktops are wired using TPS then they are "hard wired" and are not an "appliance"

    This is why non sparkies should not do their own wiring
    Prehaps you need to consult the wireing rules again then. AS/NZS 3000:2000 including all 3 ammendmants states in paragraph 1.4.6. APPLIANCE : A consuming device, other than a lamp, in which electricity is converted into heat, motion, or any other form of energy, or is substantially changed in its electrical character.

    Further rules state appliances can be fixed(1.4.7), hand-held(1.4.8), portable(1.4.9) or stationary(1.4.10)

    As far as i am aware appliances can be either 'hard wired' with TPS (and in the case of an oven or stove an isolating switch provided) or plug and socket useing flex as the lead.
    Last edited by another termite; 31st October 2007 at 12:09 AM. Reason: spell check

  14. #29
    Join Date
    Apr 2003
    Location
    hughesdale
    Posts
    0

    Default

    The bare wire could be the neutral if the insulation has come off .Yes this has happened to me when the wive wanted pretty switchs fitted, the wiring was quite old.

Similar Threads

  1. maximum power points
    By j0den in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 3
    Last Post: 8th July 2007, 11:20 PM
  2. Power and insulation to the new shed
    By har616 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 14
    Last Post: 15th January 2007, 11:54 PM
  3. Where to put the power points?
    By rscho in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 10
    Last Post: 15th July 2006, 06:38 PM
  4. 39 posts leads the reputation! Ozwinner dethroned!
    By Groggy in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 53
    Last Post: 23rd April 2006, 10:46 PM
  5. What do you do with power tool cords
    By NewLou in forum POLLS
    Replies: 21
    Last Post: 22nd March 2005, 04:41 PM

Members who have read this thread: 0

There are no members to list at the moment.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •