Results 16 to 25 of 25
Thread: Removing a swimming pool
-
25th August 2007, 12:08 AM #16
-
26th August 2007, 10:17 PM #17New Member
- Join Date
- Aug 2007
- Location
- Melbourne
- Posts
- 3
I did see this, but imagine a lot of leaves and dirt and other gunk would still accumulate in the bottom
I have heard this can be a problem with a plastic pool in an area with a high water table, but would this really be a concern with a concrete pool in Melbourne (I live in Caulfield)????
-
26th August 2007, 10:41 PM #18
a sealed concrete pool will float
whether it will ever be a problem depends on where the water table gets to when it rains and rains and rains some more
just remember thet the current drought / very dry spell with depressed ground moisture levels is not a permanent fixture and at some stage it will rain enough to possibly bring the water table close to the surface
ian
-
26th August 2007, 10:46 PM #19
-
27th August 2007, 11:28 PM #20Novice
- Join Date
- Jun 2007
- Location
- Sydney
- Posts
- 20
As already said, there is definately a possibility of a concrete pool floating when ground water rises. I suspect that you would have a hydrostatic valve installed at the bottom of your pool which is designed to relieve the pressure built up underneath the pool shell. BUT this does not guarantee that your pool will stay in the ground when empty. There are many influencing factors but if you think there is a chance of water gathering beneath your pool think long and hard before emptying your pool! If you have good drainage such as nicely sloping block that is well above the water table then you're sure to be safe.
How do I know? I've had my concrete pool empty for a good 12 months and had absolutely no movement at all.
-
23rd October 2007, 12:00 AM #21
How bout teaching the kids to swim. They start learning from 6 months on. Takes away the danger and everyone gets to enjoy whats already there.
But if your after the extra yard, deckit.
-
24th October 2007, 11:13 AM #22
Put a roof over it and turn it into a shed.
-
24th October 2007, 04:15 PM #23GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 355
Import a few Maron from here in WA and turn it into a Maron pond and then sit back and watch the $$$$$ roll in.
-
24th October 2007, 04:34 PM #24Intermediate Member
- Join Date
- Sep 2007
- Location
- Australia
- Posts
- 43
We recently filled in our pool. Ours had metal sides (old Albatros style pool) and we had to grind them out.
We registered for fill with every pool company in Brisbane (good way to get *clean* fill). After a few weeks, we had a call that someone had the fill in our area, and they organised us a bob cat and got filled the hole in in a mater of hours. It cost about $400 for the bobcat and that was all. It worked out well as we were not sure on the exact amount of dirt that was going to be required, and they just stopped bringing it when the hole was full.
We had 1.6 meters (2 meters including area under the eves) access down the side of the house (quite steep also) and I was surprised that they could get a machine through. They ended up using a 2 meter wide bobcat and excavating down under the eves. Exactly much access to you have???
Anyways - whilst we were in the process of deciding what to do, we were advised by several pool places NOT to empty the pool until we had decided what do do with it. You might want to check what the case is for concrete pools, but you may not be able to fill it up again later if you damage it by removing the water (try phoning up a concrete pool renovation mob).
We also considered the underground tank idea - has a lot of merit. Drainage was going to be the issue if we built a deck over it.
Other thing to think of, is that if you fill in a hole over 1 meter deep (according to Brisbane City Council) you must get council approval, as someone else may want to build over it in the future if they buy your place.
Another things to check are that the dirt you are receiving does not have fire ants in it (do you get these in VIC?).
Hope this helps.
-
24th October 2007, 04:40 PM #25Intermediate Member
- Join Date
- Sep 2007
- Location
- Australia
- Posts
- 43
If you live on a sloping block, you could take the dirt from somewhere else in the yard, and re retain where you took the dirst from (this was our backup option).
That would give you the dirt, then you would just need to get the machinery over the house.
Similar Threads
-
Pool Renovation Blog
By spartan in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 15Last Post: 1st October 2006, 06:01 PM -
swimming pool plumbing
By reybec in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 21Last Post: 10th July 2006, 07:21 PM -
Planning a Pool Deck
By Clive McF in forum DECKINGReplies: 6Last Post: 14th May 2006, 12:35 AM -
Removing stain from F/Glass Pool
By smidsy in forum POOLS, SPA & WATER FEATURESReplies: 5Last Post: 5th August 2004, 09:58 PM
Bookmarks