Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2007
    Location
    Perth, WA
    Posts
    67

    Default Recessed Windows?

    Hi,

    I am working on a 2nd storey addition to a double brick home, the 2nd storey is going to be steel framed, stud walls.

    I am wondering how I can go about installing the aluminium windows in the upper story, so they are still recessed to match the existing windows downstairs.

    I was playing with the idea of fixing the window from the inside instead of the outside, then sealing up the outside edges with sikaflex, before installing the blueboard, i would have to run the blueboard into the recess and it would lip underneath the edges of the window. Once the board has been rendered the edges of the window should be flush with the render finish, and it should match the look of the brick downstairs.

    Would this provide enough seal around the window to prevent water getting in? Or would I need to run a flashing somewhere?

    Once the windows are installed I would do another stud wall on the inside (double stud, ha!), so that the windows have a sill on the inside also.

    I hope you guys can understand my ramblings, Its kind of hard to explain.

    Thanks!

  2. #2
    Join Date
    Jun 2007
    Location
    Perth, WA
    Posts
    67

    Default

    no suggestions?

    The windows are going in on monday so any advise would be appreciated!

Similar Threads

  1. Question on windows
    By Wild Dingo in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 10
    Last Post: 28th July 2007, 12:09 PM
  2. Sealing Casement Windows
    By Ausyuppy in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 4
    Last Post: 23rd June 2007, 01:19 AM
  3. Finishing Western Red Windows
    By MikeT in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 11th January 2007, 12:09 AM
  4. Replies: 0
    Last Post: 18th August 2004, 09:32 AM
  5. In regards to round windows...
    By sognal in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 11
    Last Post: 28th May 2004, 04:28 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •