Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2

Thread: shed relign

  1. #1
    Join Date
    Oct 2005
    Location
    australia
    Posts
    22

    Default shed relign

    Hello

    I have a typical 6x6 colourbond shed....biege in colour....boring

    Has anyone ever cladded over the top of the colourbond? If so was it succesful?

    What i was wanting to do is put that 1.8 brush fencing around the bottom of the shed and then clad the top (something like hardi plank painted)

    Thanks
    readnik

  2. #2
    Yonnee's Avatar
    Yonnee is offline Trailer Bloke & Mild Mannered Moderator
    Join Date
    May 2007
    Location
    Tooradin, Vic.
    Age
    52
    Posts
    484

    Default

    You could use construction adhesive for the cladding, just use a few screws until it dries, or if you want to bring the cladding out to the level of the brush fencing, you could screw/glue some treated pine battens to fix them to.

    As for your brush fencing, screw some galv. screws into your purlins but not all the way, wrap some galv. tie wire around the screws to attach the fencing to.
    Too many projects, so little time, even less money!
    Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.

Similar Threads

  1. My First Shed
    By Geebung in forum THE GARDEN SHED
    Replies: 54
    Last Post: 18th January 2008, 04:40 PM
  2. Power and insulation to the new shed
    By har616 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 14
    Last Post: 15th January 2007, 11:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •