Results 1 to 5 of 5
Thread: Down lights
-
5th October 2007, 07:47 PM #1
Down lights
Hi All
Did any body see an item on newish downlights recently, I think that don Burk special, anyway, not the usual ones ,these were more like small flouro's, no heat etc, renoing the 30year old kitchen, the ceiling has insulation,and I'm not happy about possible heat buildup probs and cost of running the usuals.
Hope someone can advise
ThanksLindz
It's only a foot long, but I don't use it as a rule
-
5th October 2007, 09:32 PM #2Senior Member
- Join Date
- Jun 2007
- Location
- In a House
- Posts
- 256
Hi you can buy compact fluro type downlights lamps that fit directly into your existing halogens their are many brands on the market now megaman phillips sylvania and so on these are 240 v type units so no transformer is required and yes very little heat is dissipated you can find these at any electrical wholesaler or lighting shop from what i recall they are still a little bit expensive but you will most certainly cut down on your enery usage!
-
7th October 2007, 11:53 AM #3Old Chippy
- Join Date
- Mar 2007
- Location
- Canberra
- Age
- 73
- Posts
- 52
Do a forum search for downlights - there have been many threads on this.
There are compact fluoros and also LEDs - the LEDs are still expensive and lowish output, but are low profile too so fit well for bench lighting under cupboards etc.
Bunnings have a small range, specialist lighting shops have more.
BTW - the CF downlights replace the complete existing 12v transformer halogen downlight fittings - they don't simply plug in to replace the lamp. There are some LED options that will do this, but are exxy and still too low light output.
There are CF lamps that fit older style 240v downlight fittings such as R80 and R60 reflector lamps.
-
7th October 2007, 05:54 PM #4
The downlight holders need to take GU10 style bulbs, pays to check the holders if they will physically fit the fluro GU10's as they are longer/taller than a normal halogen bulb. They come in several light colours(temperature in kelvin's)and range from 7watt too 13watt.
A 13watt is getting close to a 50watt halogen in brightness... it wont be long before they beat the halogens!
They are not much dearer, my fittings cost $9ea and the bulbs cost $11ea, 20 bucks a light considering they are up too 80% more efficient the extra cost can soon be recouped.....................................................................
-
10th October 2007, 08:43 AM #5
Hi All
Thanks for your responses
I have now located the Gu 10 and will probably go with them.
Gota like these forums a.Lindz
It's only a foot long, but I don't use it as a rule
Similar Threads
-
Down lights
By alisonol in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 17Last Post: 3rd March 2008, 11:06 PM -
Lights embedded in concrete
By DionM in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 3Last Post: 4th October 2007, 09:31 PM -
Wiring for Low Voltage Exterior lights
By MikeK in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 7Last Post: 26th July 2005, 09:08 PM -
Parking Lights
By oges in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 12Last Post: 30th December 2004, 06:07 PM
Bookmarks