Results 1 to 3 of 3
Thread: second floor
-
29th September 2007, 02:32 PM #1
New Member
- Join Date
- Sep 2007
- Location
- darwin
- Posts
- 1
second floor
I am going to have a go at sheeting a floor on joist at 400mm center have looked around for particle board, plywood etc. The total area is 87sqm What would be the best floor board sheeting for a wooden floor to go on to the area of the floor will house bed,lounge etc .
The design is for 18mm thick can the size of the wooden floor be used in the overall size ie 8mm floor 10mm board ? I am open to all suggestions lack of money stop me from getting a builder for it.Thank you
-
29th September 2007, 09:05 PM #2
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Victoria
- Posts
- 412
Why not just use 19mm t&g ? 10mm ply will be too thin as a substrate.
Tools
-
1st October 2007, 08:05 AM #3
SENIOR MEMBER
- Join Date
- Jan 2006
- Location
- Melbourne
- Posts
- 722
The joist would normally be at 450mm centres, if you use 400mm all teh standard sheet sizes will end off a joist when you lay them.
Reply With Quote
Similar Threads
-
Hubbies R Us
By rod1949 in forum JOKESReplies: 0Last Post: 8th February 2007, 12:05 PM -
Floating floor
By Eddie Jones in forum FLOORINGReplies: 9Last Post: 30th October 2005, 04:18 PM -
Bathroom floor renno questions
By Arron in forum BATHROOM & TOILETReplies: 5Last Post: 17th May 2005, 04:54 PM -
Questions about replacing timber floor
By Hybrid in forum FLOORINGReplies: 7Last Post: 5th April 2005, 09:57 AM -
Repairing bathroom floor
By John G in forum BATHROOM & TOILETReplies: 12Last Post: 15th August 2003, 10:50 PM
Bookmarks