![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
-
26th September 2007, 04:16 PM #1
New Member
- Join Date
- May 2007
- Location
- Australia
- Posts
- 1
Cup mark left on fine buffing oil finish.
Hi,
I have some timber with a fine buffing oil finish and someone left a wet cup on the table top and it has now left a ring marking. How do I remove this? I have tried a damo cloth. Should I try metho or something!?
Thanks
-
26th September 2007, 04:29 PM #2
Intermediate Member
- Join Date
- Jun 2007
- Location
- Warners Bay, NSW
- Age
- 73
- Posts
- 0
I'd recommend 0000 steel wool with Mirotone Wax. Do the entire table top and the mark will go and the table will look better than ever.
Regards
Greg
-
26th September 2007, 05:45 PM #3
Intermediate Member
- Join Date
- Sep 2007
- Location
- South East QLD
- Posts
- 15
Id try drying it out with a hot iron over a towel. sometimes they come good. If that fails, luckily its an oil finnish, Rub more oil into the surface with 0000 , Then wax after its dry
-
26th September 2007, 08:21 PM #4
Senior Member
- Join Date
- Feb 2006
- Location
- USA
- Posts
- 399
Rubbing compound
Another option, is using a rubbing compound, just be sure that it contains "no silicones."
MacS
-
28th September 2007, 12:12 PM #5
Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
I'd go for 0000 steel wool very gently, seeing how the mark comes off.
If it does, then refinish with some more buffing oil.Cheers, Ern
Similar Threads
-
One shot shellac finish
By Pete J in forum FINISHINGReplies: 8Last Post: 8th October 2007, 04:37 PM -
Danish oil and bees wax finish help
By macka75 in forum FINISHINGReplies: 1Last Post: 29th January 2007, 08:42 PM -
Feast and Watson Buffing Oil Query
By Crafty in forum FINISHINGReplies: 1Last Post: 10th February 2004, 11:51 AM -
Oil change
By Iain in forum JOKESReplies: 1Last Post: 1st November 2001, 06:56 PM -
How to determine type of finish
By Tony Hartwell in forum FINISHINGReplies: 5Last Post: 16th October 2000, 09:42 AM