Cup mark left on fine buffing oil finish.

[wf1]

Hi,

I have some timber with a fine buffing oil finish and someone left a wet cup on the table top and it has now left a ring marking. How do I remove this? I have tried a damo cloth. Should I try metho or something!?

Thanks

[GDL]

I'd recommend 0000 steel wool with Mirotone Wax. Do the entire table top and the mark will go and the table will look better than ever.
Regards
Greg

[Mick Nash]

Id try drying it out with a hot iron over a towel. sometimes they come good. If that fails, luckily its an oil finnish, Rub more oil into the surface with 0000 , Then wax after its dry

[MacS]

Another option, is using a rubbing compound, just be sure that it contains "no silicones."

MacS

[rsser]

I'd go for 0000 steel wool very gently, seeing how the mark comes off.

If it does, then refinish with some more buffing oil.