Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Painting tight angle
-
17th September 2007, 02:05 PM #1
Often confused!
- Join Date
- Jul 2006
- Location
- Brunswick
- Posts
- 126
- Post Thanks / Like
Painting tight angle
I've tried to search this with no luck.
Just about to paint our new room and wondering if there are any tips for painting a tight angle (less than 90 degrees) between the wall and ceiling. I can get in, just, with a small brush but wondering if there are any special gadgets out there.
Cheers
McBlurter
Lucky my spelling is okay, I'm sure there is nothing harder than painting a tight angel!!!
-
20th September 2007, 12:29 PM #2
New Member
- Join Date
- Sep 2007
- Location
- At home
- Posts
- 9
- Post Thanks / Like
If you have no cornices in this corner you could use an paint edger. Not sure on it's technical name, but they are those rectangular flat doosey ma thingies with two wheels on top and the paint goes on the material side - all hardwares/paint sores have them. They are only a coupla bucks. You can then screw a standard painters stick into alot of them, and inturn, lengthening your reach to get into those hard to reach places.
-
20th September 2007, 06:11 PM #3
GOLD MEMBER
- Join Date
- Mar 2007
- Location
- Munruben, Qld
- Age
- 84
- Posts
- 0
- Post Thanks / Like
How about spraying it?
Reality is no background music.
Cheers John
Reply With Quote
Similar Threads
-
setting plasterboard
By floydus in forum PLASTERINGReplies: 16Last Post: 6th July 2006, 12:25 AM
Bookmarks