Results 1 to 11 of 11
Thread: Organoil on redgum
-
13th May 2004, 10:27 PM #1New Member
- Join Date
- May 2004
- Location
- Little River .Victoria
- Posts
- 3
Organoil on redgum
Has anybody used Organoil on redgum before and have you any tips?
Richie
-
13th May 2004, 11:41 PM #2
What, where and how is the finished article??
-
16th May 2004, 09:40 PM #3New Member
- Join Date
- May 2004
- Location
- Little River .Victoria
- Posts
- 3
Organoil on redgum
CHRISTOPHA,I am making a coffee table out of a solid piece of redgum,and I want to use Organoil because I have had too much trouble with spray on lacquers.
Richie
-
20th May 2004, 01:52 PM #4Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
I've used it on turned bowls with OK results. It tends to raise the grain over a few weeks but a fine sand takes care of that. It also tends to darken the timber somewhat and can increase the contrast where the grain is stripy.
Isn't this sposed to be one of the oils designed for use with r.o. sanders to give a durable and even finish?
Suggest you try this with an offcut and see if you like the result
Ern
-
20th May 2004, 04:41 PM #5Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Ive used organoil interior on different types of gum, and had good results.
I finish it off with some of Ubeauts EEE wax, comes up beautiful.
Al
-
20th May 2004, 07:04 PM #6
The Organoil guy was doing a demonstration on a big burl slab of Murray red gum at the Wodonga wood show over the two days. He used the burnishing oil and used the dry and wet sanding process and it turned out real well.
Brett
Only Robinson Crusoe could get everything done by Friday!
-
20th May 2004, 07:24 PM #7Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Ive tryed the burnishing oil, never had any success with it.
Al
-
21st May 2004, 09:59 AM #8
I use both the ubeaut shellac based products and organoil. They both have their strengths and weaknesses and I allways try some on the piece that I want finished before deciding which to use. It is sometimes quite dramatic the difference between the two on different timbers. I tried organoil on some cardwellia, eek very blotchy as the medullary rays soaked up the oil far more than the timber while sanding sealer/traditional wax worked a treat. The reverse was true for some japanese cedar I have, organoil gave the timber a real lift while the wax, while shiny, was a bit flat.
The other thing that is important is the end use, oiling is probably more durable than shellac on a coffee table given the certantity of spills (not having had any experience with the hard shellac yet).
-
21st May 2004, 08:33 PM #9GOLD MEMBER
- Join Date
- Mar 2003
- Location
- Newcastle
- Age
- 70
- Posts
- 41
I'm currently using organoils 'Danish' (not the pastry) on redgum and it comes up a treat. Also good is that organoil danish does not set in the tin like all the others after they have been opened.
-
21st May 2004, 09:16 PM #10Senior Member
- Join Date
- Jun 2003
- Location
- Adelaide
- Age
- 53
- Posts
- 18
Also had good success with Organoil Danish oil also on Redgum, Jarra etc. Pretty well fool proof to use.
-
23rd May 2004, 08:50 PM #11New Member
- Join Date
- May 2004
- Location
- Little River .Victoria
- Posts
- 3
Organoil on redgum
Thanks Goldy,Len,PAH1,Ozwinner,Oges and rsser,I will try it with an orbital sander and see how it goes.
Richie
Bookmarks