View Poll Results: Change the electrical regulations to?
- Voters
- 61. You may not vote on this poll
-
No regulations
1 1.64% -
Similar regulations to NZ/UK/USA.
17 27.87% -
Allow people to sit a licence to do their own wiring (switchboards excepted).
25 40.98% -
Allow people to sit a licence to do their own wiring (switchboards included).
10 16.39% -
Allow people to sit a full licence (without doing 4 year apprenticeship).
11 18.03% -
Allow like-for-like only (replace broken components)
9 14.75% -
Keep to system how it is.
4 6.56% -
Rats - I'll do what I want anyway
8 13.11% -
Rats - I just like watching these long threads
1 1.64% -
"The law is the law" - it must there for a good reason?
0 0% -
I like the protected "closed shop" system
6 9.84%
-
23rd August 2007, 10:32 PM #16GOLD MEMBER
- Join Date
- Jan 2007
- Location
- Adelaide
- Posts
- 0
Now that the thread is cold, it is apparent that it is not going very far, for a good reason.
There are too many issues muddled together in this poll.
IMHO the questions are:
1)what level of regulation is appropriate to balance safety in a domestic setting and practicality?
-the current level: all fixed wiring needs to be done by a licensed electrician
-owner can wire up to the switchboard subject to inspection
-owner can do everything subject to inspection
-replacement of same with same should be allowed without inspection
-owner can do everything without inspection.
2)is apprenticeship necessary to ensure the competence necessary for a licence?
-yes
-no, it should be sufficient to pass a TAFE course that includes strong practical training
-no, it should be sufficient to pass a theoretical and practical examination
-no, it should be sufficient to pass a theoretical examination only.
3)is trade protection through the apprenticeship system desirable?
-yes, because apprenticeship is necessary
-yes, because trade protection is good for the economy
-no
-unsure
4)is trade protection through regulation desirable?
-yes, because the current level of regulation is the best for safety and practicality
-yes, because trade protection is good for the economy
-no
-unsure
Up to you, Chrisp or silentC, if you think that this topic is really worth pursuing further. From the level of responses, I would guess not.
-
24th August 2007, 09:40 AM #17
-
24th August 2007, 10:04 AM #18
I live in a small coastal tyown where a lot of the houses are holiday homes. This includes my next door neighbours who arrived to do a few jobs at their house three weeks ago to find that a number of power points, and fluoro lights had been fitted to ther back deck. This work was done without their knowledge and they have not been able to find out who did it! I had my sparky mate here a couple of days ago and he had a quick look at next doors electrical "work" and he showed me me several places where wiring was incorrect and fittings incorrectly placed/ fitted so that electrocution is a very real possibility. The cabling is very untidy and conduits are either missing, used inappropriately when it would have actually been easier to fit the cable inside the walls or they are just plainly untidy. All work looks very amateurish and my neighbours are very annoyed to say the least as they have a son who is an electrician and if they had wanted the work done they would have asked their tradesman son to do it, as it is they will have to get him to "repair" the work of some geographically challenged amateur. It will be hilarious if they get a bill fom this DIY type turkey!!!
-
24th August 2007, 10:10 AM #19
So have you got some lunatic DIYer there who runs around doing unlicensed electrical work on people's houses when they're not home, or do they rent the place out to tenants?
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
24th August 2007, 10:17 AM #20Those were the droids I was looking for.
https://autoblastgates.com.au
-
24th August 2007, 12:01 PM #21
F&E, thanks for kick-starting the thread again. I'm a bit confused though as you are suggesting more options to the poll than I have.
I was pleased to see that silentC and I don't hold radically different views (although from past threads I often wondered), and it seems to me the poll is breaking into two camps: the electricians mainly saying to leave things alone; and the others who seem to suggest that a different system should be considered.
For the record, I'm not suggesting an anything goes, but rather a system that provides sufficient information and training to people so that the work can be carried out safely.
Education is the key to safe outcomes - not regulation.
I don't think the only way should be via a four year apprenticeship.
-
24th August 2007, 01:14 PM #22GOLD MEMBER
- Join Date
- Jan 2007
- Location
- Adelaide
- Posts
- 0
Maybe I did not make myself clear. I am not suggesting more options for this poll. I am saying that if you want a meaningful indication of people's preferences you have to put up the 4 polls I suggested. Otherwise, you just keep getting rambling anecdotes that do not further the purpose of a meaningful discussion about the appropriateness of current legislation.
-
24th August 2007, 06:41 PM #23
No, it's not a 'renter". No-one around here can work out who or why, I was at work that day and didn't asee anyone, the old couple the other side saw a sedan with racks and ladders. That doesn't sound like even a handybloke type coot! It seems we have a phantom cable guy!!
-
24th August 2007, 09:16 PM #24
Anyone who is capable of passing a competence test should be licensed to carry out works within their level of competence.
Getting right away from conventional sparkies several trades that ought be able to perform electrical works include various radio/tv/electronics techs, motor rewinders & appliance repairers etc.
Similar Threads
-
Electrics & Plumbing - What Am I Allowed To Do?
By zeroseven in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 194Last Post: 11th August 2007, 09:38 PM -
Illegality of repairing electrical equipment
By Sturdee in forum HAVE YOUR SAYReplies: 70Last Post: 26th June 2007, 04:55 PM -
Installing cooktop - do I need an electrician - and if so why?
By Geno in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 111Last Post: 14th April 2007, 11:28 AM -
The Official Adelaide Test Thread
By bitingmidge in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 210Last Post: 6th December 2006, 08:36 AM
Bookmarks