Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
-
24th April 2004, 07:46 PM #1Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
And you thought GMC were on the lower rung!!!
Hi all
I bought a leaf blower/vac from Bunnies today, on special for under $60.
For $60 you cant expect much, or can you?
Ok, get it home and plug this baby in, it states on the pack that it can blow at 180kms per hour, ...cool.......!!
Only one little tiny weeny itsy bitsy problem, the freek'n thing dont work, straight from the pack, I didnt even assemble it, I wanted to see the inside of my shed in a 180 kms gale, this will look good, all me tools wizzing around at 180 kms, but noooo, nothing, zilch.
Then I look inside the box and see that it is made by GMC, a cheap version of GMC, can you beleive it?
I thought you couldnt get any cheaper than GMC?
So on monday back to Bunnies you go, bye , bye.
Hasta lavista, you non mother sucker.
I dont think I'll be getting too much GMC cr@p in the future.
Cheers, Al the antisuck. :eek:
-
24th April 2004, 07:54 PM #2Banned
- Join Date
- Mar 2003
- Location
- x
- Posts
- 30
Al,
A lot of leaf blowers and garden vacs have a micro switch that prevents the thing from starting unless the attachments are in place. You mention you did not assemble it, so perhaps that is the problem.
-
24th April 2004, 07:56 PM #3
Ahh
The deluxe of the bottom of the range
tony
-
24th April 2004, 08:02 PM #4Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
I did look for switches but I couldnt see any, I'll have another look tomorrow..
It was only the snorkel that was not on it.
Allan
-
24th April 2004, 08:53 PM #5
Like Tony said the cream of the crap.
-
24th April 2004, 10:12 PM #6
If its that "performance" brand model for $59.90 at Bunnies... I have had one for a few months. Used it about a dozen times and no problems so far. If it gets me another 2 dozen uses then it would have lasted 2 years at least
I'll keep my fingers crossed.How much wood could the woodchuck chuck if the woodchuck could chuck wood?
-
24th April 2004, 10:43 PM #7Senior Member
- Join Date
- Jun 2003
- Location
- Western Sydney
- Posts
- 149
If it is the one where you change the operating mode (blower / vac) by sliding the bag attachment/handle, then try moving it from one end to the other a few times.
I have a similar one (yellow), similar problem. It worked after a few kicks.
Regards,
Theva
-
25th April 2004, 11:31 AM #8Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
OK
Went out to the shed this morning and checked for switches.
No, nothing, so its just a piece of junk.
Allan
-
25th April 2004, 12:16 PM #9Banned
- Join Date
- Mar 2003
- Location
- x
- Posts
- 30
Al,
You may not be able to see them. I still think you should put the fittings on before making a judgement.
-
25th April 2004, 12:34 PM #10
Steady on Kenmil you cant have that sort of thing getting in the way of a good whinge
Unfortuantely occasionally you will get cheaper stuff (if it was junk why buy it?) that wont work straight out of the box thats why replacement warranty's are so good.
If I have a oneoff job to do I will buy the cheap version if its available and if it works beyond that job its a bonus better than having expensive makita stuff sitting in its case after 2 uses.
PeteWhat this country needs are more unemployed politicians.
Edward Langley, Artist (1928-1995)
-
25th April 2004, 12:35 PM #11Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
OK, so I'm an idiot.
Now it works.
Did I mention.
Thanks Ken
Allan
-
25th April 2004, 08:46 PM #12Senior Member
- Join Date
- Jun 2003
- Location
- Western Sydney
- Posts
- 149
It almost happened to me. Nothing worse than the store staff explaining to you and show how a blower works.
Cheers,
Theva
-
27th April 2004, 11:56 AM #13
-
14th May 2004, 09:17 PM #14
Don
I hope you aren't talking literally, otherwise you'd be like the Irish guy who wanted to join the IRA. When they sent him out to blow up a bus, he burnt his lips on the exhaust pipe.
Cheers
JimCheers
Jim
"I see dumb peope!"
-
15th May 2004, 04:49 PM #15Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Originally Posted by ozwinner
Its gone to the tip.
Now I know the reason for only buying good quality tools.
Never again. :mad:
Not happy Jan...............