Results 1 to 11 of 11
  1. #1
    Join Date
    May 2004
    Location
    Little River .Victoria
    Posts
    3

    Default Organoil on redgum

    Has anybody used Organoil on redgum before and have you any tips?
    Richie

  2. #2
    Join Date
    Nov 2003
    Location
    Beachport, South Oz, the best little town on the planet.
    Age
    73
    Posts
    776

    Default

    What, where and how is the finished article??

  3. #3
    Join Date
    May 2004
    Location
    Little River .Victoria
    Posts
    3

    Default Organoil on redgum

    CHRISTOPHA,I am making a coffee table out of a solid piece of redgum,and I want to use Organoil because I have had too much trouble with spray on lacquers.
    Richie

  4. #4
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    0

    Default

    I've used it on turned bowls with OK results. It tends to raise the grain over a few weeks but a fine sand takes care of that. It also tends to darken the timber somewhat and can increase the contrast where the grain is stripy.

    Isn't this sposed to be one of the oils designed for use with r.o. sanders to give a durable and even finish?

    Suggest you try this with an offcut and see if you like the result

    Ern

  5. #5
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Ive used organoil interior on different types of gum, and had good results.

    I finish it off with some of Ubeauts EEE wax, comes up beautiful.

    Al

  6. #6
    Join Date
    Aug 2000
    Location
    Sydney, NSW
    Posts
    190

    Default

    The Organoil guy was doing a demonstration on a big burl slab of Murray red gum at the Wodonga wood show over the two days. He used the burnishing oil and used the dry and wet sanding process and it turned out real well.
    Brett

    Only Robinson Crusoe could get everything done by Friday!

  7. #7
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Ive tryed the burnishing oil, never had any success with it.


    Al

  8. #8
    Join Date
    Apr 2004
    Location
    Canberra
    Posts
    0

    Default

    I use both the ubeaut shellac based products and organoil. They both have their strengths and weaknesses and I allways try some on the piece that I want finished before deciding which to use. It is sometimes quite dramatic the difference between the two on different timbers. I tried organoil on some cardwellia, eek very blotchy as the medullary rays soaked up the oil far more than the timber while sanding sealer/traditional wax worked a treat. The reverse was true for some japanese cedar I have, organoil gave the timber a real lift while the wax, while shiny, was a bit flat.

    The other thing that is important is the end use, oiling is probably more durable than shellac on a coffee table given the certantity of spills (not having had any experience with the hard shellac yet).

  9. #9
    Join Date
    Mar 2003
    Location
    Newcastle
    Age
    70
    Posts
    41

    Default

    I'm currently using organoils 'Danish' (not the pastry) on redgum and it comes up a treat. Also good is that organoil danish does not set in the tin like all the others after they have been opened.

  10. #10
    Join Date
    Jun 2003
    Location
    Adelaide
    Age
    53
    Posts
    18

    Default

    Also had good success with Organoil Danish oil also on Redgum, Jarra etc. Pretty well fool proof to use.

  11. #11
    Join Date
    May 2004
    Location
    Little River .Victoria
    Posts
    3

    Default Organoil on redgum

    Thanks Goldy,Len,PAH1,Ozwinner,Oges and rsser,I will try it with an orbital sander and see how it goes.
    Richie

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •