Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    53
    Posts
    0

    Default Deck regulations in S.E. Melbourne?

    G'day,

    I'm soon to start work on my verandah (deck).

    Without going into the specifics of the build, what are the building regulations in the Yarra Ranges? I'm not getting a permitt of any such because I think it's bs, a waste of time, money, too many hurdels to jump over and too much red tape, and I can't see justificastion of suplying fees associated with draftsman etc. (yeah, I expect to get for this, but so ) and my my neighbours have no objections to it.

    I've had a look at the council website and as can be expected it gives no information, to stop the likes of me I suppose.

    Height of the verandah will be about 2' - 3' in parts roofed in laserlight. Approx. 5m x 3m

    One thing I'm interested to know is the general rules of distance from fence lines.

    Flame me, help me.

    Thanks for looking.
    I make things, I just take a long time.

    www.brandhouse.net.au

  2. #2
    Join Date
    Nov 2006
    Location
    Melbourne
    Age
    65
    Posts
    20

    Default

    Legally, you need a hand rail over 1m in ht. (I'm pretty sure that's right, but don't blame me if it's wrong).
    there's one bit of info If the deck is over 1m from the ground level, that is.
    TM
    Last edited by TermiMonster; 24th July 2007 at 08:32 PM. Reason: remove ambiguity.

  3. #3
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    53
    Posts
    0

    Default

    G'day TermiMonster,

    Yep, it'll have a rail Just forgot to mention that bit.
    I make things, I just take a long time.

    www.brandhouse.net.au

  4. #4
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    0

    Default

    Probably similar regulations in Oz, or advisable anyway: Handrail spacing should be small enough to prevent toddler passage; max 4" (100mm) between verticals or parts in interior region, max 2" (50mm) from deck to bottom rail, if used. Special situation at stairs: max 6" (150mm) round opening in the triangle formed by tread, riser, and bottom rail. Use of bottom rail makes it easier to sweep off tree debris; DAMHIKT.

    Joe
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  5. #5
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default

    First of all I agree that Shire of Yarra Ranges is difficult to deal with.

    As for the deck the following information can be found by navigating their site:

    For setbacks overlooking etc try http://www.dse.vic.gov.au/planningsc...nges/home.html and check clause 54.

    You will also need to be careful with fire ratings if it is close to the boundary.
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  6. #6
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    53
    Posts
    0

    Default

    G'day Sir Stinkalot,

    Where abouts on that lik do I find clause 54?

    (just found it, now trying to work out how clause 54 applies )
    I make things, I just take a long time.

    www.brandhouse.net.au

Similar Threads

  1. Replies: 12
    Last Post: 25th June 2007, 05:16 PM
  2. Help with planning deck
    By Spelunx in forum DECKING
    Replies: 8
    Last Post: 6th December 2006, 10:37 PM
  3. Deck refinishing
    By jimj in forum FINISHING
    Replies: 2
    Last Post: 20th April 2005, 07:33 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •