Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2007
    Location
    Bathurst
    Posts
    7

    Default Stopping water damage around doors (with pics).

    Hi again,

    Is there anything else I should be doing to prevent water damage on a cypress floor at a front door? I have already assumed that you should stop any sort of raging torrent from flowing inside.

    Also, the front door floorboard butts up to a concrete threshold about an inch or so inside the house, but I've never noticed the carpet wet there and the board is rotten right through.

    The front sliding door sits entirely on a board and it is totally gone.

    So back to the original question....is there anything extra i should be doing?

    cheers
    Last edited by bionicbeatboy; 20th July 2007 at 09:58 PM. Reason: Adding pics
    Isn't it ironic that nature gave the tortoise a drag factor of 0.3

  2. #2
    Join Date
    Mar 2007
    Location
    Adelaide South Australia
    Posts
    76

    Default

    pictures please
    Don't force it, use a bigger hammer.

    Timber is what you use. Wood is what you burn.

  3. #3
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    0

    Default

    For the swinging front door, I'd suggest adding a door bottom weatherstrip (terminology may vary); something like this:

    http://www.thehardwarehut.com/catalo...hp?p_ref=25542

    Also, a storm door may provide additional protection.

    For the sliding door, consider drilling some drain holes on the outside flange of the track. This would allow rainwater to exit outside before it can spill over the inside flange.

    Joe
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  4. #4
    Join Date
    Jul 2007
    Location
    Bathurst
    Posts
    7

    Default

    There already is a weather guard... maybe i just need a better one!
    i was thinking i could fully seal that whole board so if anything gets in it still can penetrate the side of the board???

    and the drill holes are a really good idea...i think the water is seeping in the joins in the corners..i dont really see it overflowing..but i have noticed it damp down there now and then.

    what does anyone thing of sealing every side of the edge floorboard??

    will that still rot over time?
    Isn't it ironic that nature gave the tortoise a drag factor of 0.3

  5. #5
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    You could ry fitting a canopy over the door to prfevent most of the water hitting it to start with.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

Similar Threads

  1. Grey Water Tank
    By woodsprite in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 103
    Last Post: 9th August 2007, 09:31 PM
  2. Rain Water
    By gdf26562 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 3
    Last Post: 20th September 2006, 04:31 PM
  3. Hot water goes cold in the pipes: what to do
    By silentC in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 31
    Last Post: 19th July 2006, 10:16 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •