Results 1 to 11 of 11
  1. #1
    Join Date
    Jul 2007
    Location
    melbourne
    Posts
    2

    Default What type of hardwood floorboard is this??

    Hi all,

    I have just finished the rough sand of my hardwood floors. Still have the medium and fine course to do. I thought that the hardwood might be tasmanian oak (or victorian ash) but there is too much color variation. Anyone have any idea what type of wood this is??

    http://picasaweb.google.com/gsdavies/Floorboards - you can click on each of the 3 photos for a larger view.

    If it helps its is a 1950's house in Victoria.

    Thanks

  2. #2
    Join Date
    Sep 2006
    Location
    Behind that little door under the thicknesser...
    Posts
    44

    Default

    Yep it's Vic Ash/Tas Oak. The colour variation isn't surprising - I think it's quite pretty.

    For Gods sake don't two pack it!!! Please, please just oil and wax......only your lunch should be wrapped in plastic!!!
    Ours is not to reason why.....only to point and giggle.

  3. #3
    Join Date
    Dec 2003
    Location
    Frankston-Langwarrin VIC
    Age
    61
    Posts
    280

    Thumbs up

    I agree with SBD on the timber type. (Tas Oak-ish)

    I dis-agree with SBD on the finish. I strongly urge that you go with 2 pack.

  4. #4
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Definately Tas Oak
    Its not Vic Ash - far too much colour variation.

    I'd use 2 pac too,
    far more durable and stain resistant than oil finish.
    Regards, Bob Thomas

    www.wombatsawmill.com

  5. #5
    Join Date
    Jul 2007
    Location
    melbourne
    Posts
    2

    Default

    Thanks guys.

    I am a bit cautious about the solvent based polyuretanes since my wife is pregnant.....I have read on the labels and on a few websites that this is nasty stuff for pregnant women, asthma suffers since the smell hangs around for a while....

    What are the water based finishes like? Are they still hardwearing, scratch resistant etc. Any recommendations on brands?

  6. #6
    Join Date
    Feb 2005
    Location
    Melbourne, Australia
    Age
    47
    Posts
    0

    Default

    Quote Originally Posted by echnidna View Post
    Definately Tas Oak
    Its not Vic Ash - far too much colour variation.
    Aren't they one and the same?
    I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
    Albert Einstein

  7. #7
    Join Date
    Mar 2005
    Location
    Too close to Sydney
    Posts
    133

    Default

    Well its not like you are going to find a Tassie Oak tree growing anywhere.

  8. #8
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Quote Originally Posted by martrix View Post
    Aren't they one and the same?
    Nope,
    Ash is just that - Vic ash

    Tas oak is a generic term for mixed south east australian hardwoods.
    While ostensibly it is primarily 4 or 5 diffferent species
    in practise it means any hardwood in the forest that they can mill.

    Thats why there can be such large colour variations in a Tas oak floor - quite unlike the bland blonde ash floor
    Regards, Bob Thomas

    www.wombatsawmill.com

  9. #9
    Join Date
    Feb 2005
    Location
    Melbourne, Australia
    Age
    47
    Posts
    0

    Default

    Tasmanian Oak and Victorian Ash are generic names for a broad range of South East Australian species of Eucalypt hardwoods.
    The predominant three species are E. Regnans (Mountain Ash), E. Delegatensis (Alpine Ash), and E, Obliqua (Brown top or Messmate).
    I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
    Albert Einstein

  10. #10
    Join Date
    May 2006
    Location
    sydney
    Age
    65
    Posts
    346

    Default

    You can use 2 pack, or single pac solvent based coatings if yo like. They are the most durable. The smell will last for about 30 min after you open the windows the next day. I would remove your wife from the house during coating, but replace her when done.

  11. #11
    Join Date
    Dec 2003
    Location
    Frankston-Langwarrin VIC
    Age
    61
    Posts
    280

    Default

    Quote Originally Posted by Larry McCully View Post
    You can use 2 pack, or single pac solvent based coatings if yo like. They are the most durable. The smell will last for about 30 min after you open the windows the next day. I would remove your wife from the house during coating, but replace her when done.

    Replace her with what? A new wife, perhaps? Maybe a sports car

Similar Threads

  1. Should I use LVL or Hardwood for my deck?
    By LotteBum in forum DECKING
    Replies: 3
    Last Post: 3rd May 2007, 09:41 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •