Results 1 to 11 of 11
  1. #1
    Join Date
    Apr 2004
    Location
    London, Ohio
    Age
    89
    Posts
    524

    Default Woodworking Quiz;

    Greetings Friends,
    What is meant by the term BALANCED PANEL?

    This is not a balancing act.

    Respectfully.
    Ralph Jones Woodworking
    London, Ohio

  2. #2
    Join Date
    Jan 2003
    Location
    Perth,Western Australia.
    Posts
    64

    Default

    Is it the red (second hand) panel the repairer bolted onto your blue car after your bent it trying to park at the local supermarket.

    :confused:

  3. #3
    Join Date
    Aug 2003
    Location
    Pambula
    Age
    59
    Posts
    5,026

    Default

    OK, time for a serious answer, just to show that I'm not always a frivolous goose.

    I think it's related to when you have a composite panel which is comprised of a core of one material and a different material on the outer surfaces. It is balanced when you ensure that the skins are of the same material so that any change in dimension of the skin in relation to the core does not cause warping.
    "I don't practice what I preach because I'm not the kind of person I'm preaching to."

  4. #4
    Join Date
    Jan 2003
    Location
    Melbourne, Australia
    Age
    54
    Posts
    243

    Default

    It is the panel that contains the 32 channel mixer and computer that producers use to make good looking people with no talent sound reasonable, and hence sell records to fantasising teens.

    :mad: bugger I was going to be serious, oh well
    Great minds discuss ideas,
    average minds discuss events,
    small minds discuss people

  5. #5
    Join Date
    Apr 2003
    Location
    Endeavour Hills, Melbourne
    Age
    72
    Posts
    52

    Default

    It's when you stuff up the left and right rails, the inserted panel is said to be a 'balanced' or a balanced panel.

    Gordon.

  6. #6
    Join Date
    Dec 2001
    Location
    Between a rock & a hard place (vic)
    Posts
    367

    Post

    It’s a new type of concrete tilt panel that according to the manufacturer doesn’t need any temporary bracing!

    Amazingly very few of these have fallen over so far, and of the two hundred prototypes that have so far been made and trialed, 197 were salvageable once they did fall – however after they have fallen it is advisable to install props when they are again lifted into place. Many skeptics believe that physically they are no different to ordinary concrete tilt panels except for the name and the fact that they somehow do not fracture when dropped. In fact even I'd hazard a guess that they have no magical balancing powers whatsoever. I tried to contact the manufacturer about this but was told by their solicitor that the boss has gone on a holiday to Majorca, Spain but will be happy to answer any questions upon his return.

  7. #7
    Join Date
    Feb 2004
    Location
    Oxley, Brisbane
    Age
    79
    Posts
    537

    Default

    Sorry guys, but it is nothing to do with any of the above.
    In the early days when lifts (elevators for any foreigners) had first been invented, there was often a problem with the cage. The problem was that when somebody actually stood inside the lift but slightly off to one side, a small amount of distortion took place within the walls of the cage. This was enough to ensure that the cage scraped along the support rails and wore out very quickly. Not to mention also the alarming noise that would ensue from having the steel pieces rubbing against each other. To overcome this problem a special type of wall panel was developed that used the principal of ‘reverse racking.’

    Now as we all know, thanks to Mick’s excellent description in "What is Racking"? this distortion was a quantifiable amount that could be overcome by the judicious application of an equal and opposite force. And THAT is where the panels come in. These balanced (or balancing) panels were developed to automatically compensate for any distorting forces that were detected.

    The invention ensured the fortunes of the company, “Waygood Otis”, and the technology is now leased world wide and contributes considerably to alleviate Australia’s balance of payment problems.
    Bob Willson
    The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.

  8. #8
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Isnt it when you have like a commitee, with 50 percent men and 50 percent women?
    So the opinion is balanced, well it would be balanced if you didnt include the women.

    Cheers, Gyro

  9. #9
    Join Date
    Feb 2004
    Location
    Oxley, Brisbane
    Age
    79
    Posts
    537

    Default

    Boy are you gunna get it now.


    Hmmmmmmm!! I am surprised Bob or have you allowed them to drag you down?? .


    No, no, no , It isn't me that is gunna get him, it is all the Sheilas that are going to read what he said. They'll get him.
    Last edited by Bob Willson; 30th April 2004 at 05:50 AM.
    Bob Willson
    The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.

  10. #10
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    its when the panel is stained the same color on the front and back

    Hey Bob, just make sure all the women on your committee make up all the sub-committees. That way than can prove their equality by doing all of the work.
    Regards, Bob Thomas

    www.wombatsawmill.com

  11. #11
    Join Date
    Apr 2004
    Location
    London, Ohio
    Age
    89
    Posts
    524

    Default WOODWORKING QUIZ ANSWER;

    Greetings Friends,
    Again you blokes never disappoint me with your antidotes and witty answers.

    The answer for todays as already mentioned is a balanced panel is one for the purpose of the Standard, a balanced panel is on which is free from warp that effects serviceability for it's intended use.

    Thank you for your support.

    Respectfully,
    Ralph Jones Woodworking
    London, Ohio

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •