Results 1 to 9 of 9

Thread: new wall oven

  1. 5th June 2007, 06:35 PM #1
    Gumby's Avatar
    Gumby
    Gumby is offline The typo kign
    Join Date
    Aug 2003
    Location
    Melbourne - Outer East Foothills
    Posts
    1,557

    Default new wall oven

    The time has come to chuck out the old wall oven and replace it with a decent one (Miele etc, not sure yet). The cavity for the old one is about 600 wide x 1030 high, which seems much larger than the modern ovens need. The Miele ovens for example only seem to be around 600 high. Width shouldn't be a problem but waht to do with the extra gaps above and below (assuming I mount it in the middle). Anybody been through this ?

    Old oven pic attached.
    If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
    Reply With Quote Reply With Quote
  2. 5th June 2007, 06:50 PM #2
    Cliff Rogers's Avatar
    Cliff Rogers
    Cliff Rogers is offline Timber Hoarder
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    We have a St. George double oven.
    It is 1000mm high by 600mm wide.
    Australian Made, 5 year warranty.
    About $3890 inc but we got it for $3500 in Jan 2005.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
    Reply With Quote Reply With Quote
  3. 5th June 2007, 07:11 PM #3
    echnidna's Avatar
    echnidna
    echnidna is offline SENIOR MEMBER
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    If the new oven isn't as high you may be able to fit a microwave etc shelf above the oven
    Regards, Bob Thomas

    www.wombatsawmill.com
    Reply With Quote Reply With Quote
  4. 5th June 2007, 10:01 PM #4
    pharmaboy2
    pharmaboy2 is offline Senior Member
    Join Date
    Oct 2005
    Location
    newcastle
    Posts
    216

    Default

    built in coffee machine?? smallest oven you canfind plus a panasonic inverter microwave (about the least height MW I know of)
    Reply With Quote Reply With Quote
  5. 5th June 2007, 10:17 PM #5
    Gumby's Avatar
    Gumby
    Gumby is offline The typo kign
    Join Date
    Aug 2003
    Location
    Melbourne - Outer East Foothills
    Posts
    1,557

    Default

    The coffee machine is sitting on ther bench - wouldn't be without it. I can't drink instant any more, not after having one of those.

    I like the micro idea, will look into it, thanks guys. And even the larger St George, could be a goer.
    If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
    Reply With Quote Reply With Quote
  6. 5th June 2007, 10:43 PM #6
    bitingmidge's Avatar
    bitingmidge
    bitingmidge is offline Pretend my avatar moves!
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    2,869

    Default

    I'd cut some strips to fit exactly in the space, then use my Domino to fix them accurately in place.


    P
    Reply With Quote Reply With Quote
  7. 5th June 2007, 10:55 PM #7
    Honorary Bloke's Avatar
    Honorary Bloke
    Honorary Bloke is offline Alien in a Strange Land
    Join Date
    Jun 2006
    Location
    Barboursville, Virginia USA
    Age
    77
    Posts
    549

    Default

    Did this a few months ago. Replaced an old double oven with a single and a microwave niche.

    Pic 1: Old oven (vntage 1970s look)

    Pic 2: New configuration.

    Sorry about the flash reflection. Can get better ones later.
    Cheers,

    Bob


    Reply With Quote Reply With Quote
  8. 5th June 2007, 11:30 PM #8
    Gumby's Avatar
    Gumby
    Gumby is offline The typo kign
    Join Date
    Aug 2003
    Location
    Melbourne - Outer East Foothills
    Posts
    1,557

    Default

    Quote Originally Posted by bitingmidge View Post
    I'd cut some strips to fit exactly in the space, then use my Domino to fix them accurately in place.


    P
    Could some kind mod move this post to the festool section

    Quote Originally Posted by Honorary Bloke View Post
    Did this a few months ago. Replaced an old double oven with a single and a microwave niche.

    Pic 1: Old oven (vntage 1970s look)

    Pic 2: New configuration.

    Sorry about the flash reflection. Can get better ones later.
    Thanks Bob, very useful
    If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
    Reply With Quote Reply With Quote
  9. 5th June 2007, 11:43 PM #9
    DJ’s Timber's Avatar
    DJ’s Timber
    DJ’s Timber is offline Hoarder of Timber
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    3,539

    Default

    I am going thru the same thing myself. Old oven spat the dummy, have replaced the oven which has left me with a nice big hole above. One of these days I'll get round to putting in a extra shelf to put the microwave on
    Cheers

    DJ

    ADMIN
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Rendering a wall - how to
    By Big Clint in forum RENDERING
    Replies: 15
    Last Post: 15th January 2009, 11:19 AM
  2. Tall Retaining wall and fence
    By jgib in forum LANDSCAPING, GARDENING, OUTDOORS
    Replies: 2
    Last Post: 29th March 2007, 12:09 PM
  3. Installing Wall Oven
    By d_cal in forum KITCHENS
    Replies: 6
    Last Post: 23rd January 2007, 11:08 AM
  4. building wall oven carcass
    By zendo in forum KITCHENS
    Replies: 7
    Last Post: 28th October 2006, 09:47 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules